Skroutz.mt

Plus SW M Electric Surface Water Pump with Automatic Suction 2hp Single-Phase
Surface Water Pumps

Plus SW M Electric Surface Water Pump with Automatic Suction 2hp Single-Phase Code: 200128

The Plus SW M self-priming electric surface pump has a cast-iron body and open impeller. It is suitable for liquids at temperatures from -10 °C to 60 °C and features a check valve and a Viton seal...

The Plus SW M self-priming electric surface pump has a cast-iron body and open impeller. It is suitable for liquids at temperatures from -10 °C to 60 °C and features a check valve and a Viton seal suitable for wastewater.

The suction lift reaches up to 7 m, while the ports have a diameter of 2″ + 2″. The ambient temperature can reach up to 40 °C.

  • Power...
See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
350 40 €
Delivery Fri, 06 Nov - Tue, 10 Nov
83,00 €   shipping cost
Sent from Greece
From Istikoglou
Greece
See Water Pumps on the page of Istikoglou

Learn more about invoicing
Review the product
Product report

Description

Description

The Plus SW M self-priming electric surface pump has a cast-iron body and open impeller. It is suitable for liquids at temperatures from -10 °C to 60 °C and features a check valve and a Viton seal suitable for wastewater.

The suction lift reaches up to 7 m, while the ports have a diameter of 2″ + 2″. The ambient temperature can reach up to 40 °C.

  • Power supply: Electric
  • Horsepower: 2 hp
  • Power: 1.5 kW
  • Voltage: Single-phase, 220 V
  • Installation: Horizontal
  • Self-priming: Yes
  • Maximum suction lift: 7 m
  • Flow rate: 8 m³/h
  • Head: 15 m
  • Body material: Cast iron
  • Impeller material: Cast iron
  • Impeller type: Open
  • Check valve: Yes
  • Seal: Viton, suitable for wastewater
  • Liquid temperature: From -10 °C to 60 °C
  • Maximum ambient temperature: 40 °C
  • Ports: 2″ + 2″

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
200128

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Flow Rate
8 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
15 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Plus SW M self-priming electric surface pump has a cast-iron body and open impeller. It is suitable for liquids at temperatures from -10 °C to 60 °C and features a check valve and a Viton seal suitable for wastewater.

The suction lift reaches up to 7 m, while the ports have a diameter of 2″ + 2″. The ambient temperature can reach up to 40 °C.

  • Power supply: Electric
  • Horsepower: 2 hp
  • Power: 1.5 kW
  • Voltage: Single-phase, 220 V
  • Installation: Horizontal
  • Self-priming: Yes
  • Maximum suction lift: 7 m
  • Flow rate: 8 m³/h
  • Head: 15 m
  • Body material: Cast iron
  • Impeller material: Cast iron
  • Impeller type: Open
  • Check valve: Yes
  • Seal: Viton, suitable for wastewater
  • Liquid temperature: From -10 °C to 60 °C
  • Maximum ambient temperature: 40 °C
  • Ports: 2″ + 2″

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
200128

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Flow Rate
8 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
15 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

350,40 €
83,00 €   shipping cost