Power (Stereo Mode):

• 2x1050W @ 8Ohm (FTC 20Hz- 20kHz, 0.1%THD)
• 2x1100W @ 8Ohm (EIA 1kHz, 0.1%THD)
• 2x1600W @ 4Ohm (FTC 20Hz- 20kHz, 0.1%THD)
• 2x1800W @ 4Ohm (EIA 1kHz, 0.1%THD)
• 2x2000W @ 2Ohm (FTC 20Hz- 20kHz, 0.1%THD)
• 2x2500W @ 2Ohm (EIA 1kHz, 0.1%THD)

Power (Bridge Mode):

• 3600W @ 8Ohm (EIA 1kHz, 0.1%THD)
• 5000W @ 8Ohm (EIA 1kHz, 0.1%THD)

Signal to Noise: 20Hz-20kHz, 8Ohms: >-100dB

Input Sensitivity @ 8Ohms: 1.42V (+5.3 dBu)

Voltage Gain @8Ohms: 64x (36dB)

Output Circuitry: 3-tier Class H

Power Requirements: 230V

1/8 power pink noise at 4 ohms: 26.9 A

Distortion (SMPTE-IM): 250 @ 8 ohms

Input Impedance: 10k ohms unbalanced, 20k ohms balanced

Input Clipping: 6.4 Vrms (+18 dBu)

Cooling: Continuous with fan, rear-to-front air flow

Connections per channel:

• Input: Active balanced, 3-pin Euro-style detachable terminal block and XLR (pin 2+)
• Output: Touch-proof binding posts / Neutrik Speakon®

Controls:

• Front: AC Switch, gain controls on channels 1 & 2
• Rear: 10-position DIP switch

Indicators:

• Power-On: Green LED
• Signal: Yellow LED (1 per channel)
• Clip: Red LED (1 per channel)
• Protect: Red LED

Protections:

• Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
• Overload Protection: Turn-on/off muting / AC coupling (850, 1450) / Triac crowbar (1850HD, 2450, 4050HD, 5050) on each channel

Power Requirements: 100, 120, 230 VAC, 50 – 60 Hz (factory configured)

Dimensions (HxWxD): 132 x 483 x 404 mm

Net Weight: 33.1 kg

Gross Weight: 37.2kg