Skroutz.mt

Karcher BP 4 Deep Well Single-phase Pump Drilling 0.93hp 1.645-421.0
Submersible Water Pumps

Karcher BP 4 Deep Well Single-phase Pump Drilling 0.93hp 1.645-421.0

Key features:

  • Maximum submersion depth: 12m
  • Performance: 4600 Lit/h
  • Maximum temperature: 35°C
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    43

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
Review the product
Product report

Description

Description

Submersible borehole pump from the manufacturer Karcher, used for pumping water from a depth greater than 8 meters.

Details

  • The BP 4 Deep Well is a submersible pressure pump - ideal for use in wells. With a stainless steel casing. Auxiliary mounting foot and separate on/off switch.
  • The BP 4 Deep Well submersible pressure pump is ideal for use with alternative water sources. Whether for garden irrigation or for indoor supply of treated water in combination with a pressure switch - with borehole water from your own well you can save liters of valuable drinking water at home and in the garden. The pump casing and threaded connections are made of stainless steel and are particularly durable. An integrated pre-filter and a support foot reliably protect the pump's water inlet from debris during and after installation. The 15-meter rope included in the package can be attached to the pump ensuring its safe descent and lifting from the well. The on/off switch at the end of the cable. With the separate on/off switch at the end of the cable, the pump can be operated easily and safely. Thanks to the hose connector set included in the package, 3/4" and 1" hoses can be connected to the pump without any problem. Includes an integrated flow control valve.

Features

  • Stainless steel casing and connection adapters: Increased lifespan and shock resistance
  • On/off switch at the end of the cable: Safe and convenient pump operation
  • Includes 15-meter rope: For secure handling of the pump
  • Built-in pre-filter: Protects the pump from contamination and extends its lifespan and operational reliability
  • Includes pump connection piece and check valve: Quick connection of 3/4" and 1" hoses to the pump
  • Auxiliary support foot: Reliable protection from dirt when placing the pump


Specifications

  • Max. motor power: 700W
  • Max. water delivery height: 43 / 4.3 bar
  • Maximum submersion depth:12m
  • Delivery temperature, max.: 35°C
  • Thread connection: G1
  • Voltage : 230V
  • Frequency: 50Hz
  • Weight without accessories: 7.1Kg
  • Dimensions (L x W x H): 105x105 x710mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
697.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
3/4", 1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
43 m

Maximum Head Height: 43


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.

Materials & Construction

Set
Yes
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Submersible borehole pump from the manufacturer Karcher, used for pumping water from a depth greater than 8 meters.

Details

  • The BP 4 Deep Well is a submersible pressure pump - ideal for use in wells. With a stainless steel casing. Auxiliary mounting foot and separate on/off switch.
  • The BP 4 Deep Well submersible pressure pump is ideal for use with alternative water sources. Whether for garden irrigation or for indoor supply of treated water in combination with a pressure switch - with borehole water from your own well you can save liters of valuable drinking water at home and in the garden. The pump casing and threaded connections are made of stainless steel and are particularly durable. An integrated pre-filter and a support foot reliably protect the pump's water inlet from debris during and after installation. The 15-meter rope included in the package can be attached to the pump ensuring its safe descent and lifting from the well. The on/off switch at the end of the cable. With the separate on/off switch at the end of the cable, the pump can be operated easily and safely. Thanks to the hose connector set included in the package, 3/4" and 1" hoses can be connected to the pump without any problem. Includes an integrated flow control valve.

Features

  • Stainless steel casing and connection adapters: Increased lifespan and shock resistance
  • On/off switch at the end of the cable: Safe and convenient pump operation
  • Includes 15-meter rope: For secure handling of the pump
  • Built-in pre-filter: Protects the pump from contamination and extends its lifespan and operational reliability
  • Includes pump connection piece and check valve: Quick connection of 3/4" and 1" hoses to the pump
  • Auxiliary support foot: Reliable protection from dirt when placing the pump


Specifications

  • Max. motor power: 700W
  • Max. water delivery height: 43 / 4.3 bar
  • Maximum submersion depth:12m
  • Delivery temperature, max.: 35°C
  • Thread connection: G1
  • Voltage : 230V
  • Frequency: 50Hz
  • Weight without accessories: 7.1Kg
  • Dimensions (L x W x H): 105x105 x710mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
697.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
3/4", 1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
43 m

Maximum Head Height: 43


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.

Materials & Construction

Set
Yes
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

311,00 €
38,00 €   shipping cost