TECHNICAL CHARACTERISTICS:

• Coverage: 8-10m2 / Lt per coat
• Dilution: First coat: 15% water, Second coat: 5-10% water
• Drying: 1 - 2 hours depending on application conditions

SURFACE PREPARATION:

• The surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, mold or moisture residues.
• For new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water).
• Apply the product in 2 coats, which should be spaced 1 - 2 hours apart.
• The product gains all its mechanical resistances after 20 - 30 days.

APPLICATION CONDITIONS:

• Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%.
• Adverse conditions during application can alter the final properties of the paint.

APPLICATION TOOLS:

• Brush
• Roller
• Paint spray gun

During work, keep the tools "wet" in the container or the receptacle with the product. Remove excess product back into the box and clean the tools immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids into the groundwater.

CAUTION: Wear protective gloves, protective clothing, and personal protective equipment for the eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easily possible. Continue rinsing.

Contact the POISON CENTER immediately at 210 7793777.