FAST AND RIGHT is an excellent varnish paint for new and rusty, indoor and outdoor metal surfaces.

No primer is needed as it is applied directly onto rust. It binds rust and prevents its spread. It is very easy to apply, spreads wonderfully, provides excellent gloss that lasts and does not yellow.

To ensure proper adhesion of the product, the surface must be cleaned of dust, grease, oils, peeling old paint, rust, mold residues or moisture.

Shake the product well and apply it directly to the rusty surface. The product acquires all its mechanical resistance after 20 - 30 days.

Application conditions for FAST AND RIGHT:

• Avoid applying the product at temperatures below 6°C and above 40°C.
• Avoid application when the relative humidity is greater than 80%.
• Adverse conditions during application can alter the final properties of the product.

Application tools for FAST AND RIGHT:

• Brush
• Roller

During work, keep the tools “wet” in the container. Drain the product well from the tools and clean immediately with white spirit. If the product dries, it can only be removed with strong detergents. Do not empty the wash liquids into the water table.

Coverage: 10-15m2 / Lt on suitably prepared surfaces

Thinning: 1 - 5% White spirit

Drying time: 1 - 2 hours depending on application conditions