Skroutz.mt

Super Racer (SR) So Fast Assembled 3D Printer Dual Extruder
3D Printers

Super Racer (SR) So Fast Assembled 3D Printer Dual Extruder

The FLSUN Super Racer (SR) So Fast is a Delta 3D printer with three vertical axes and a metal frame that helps reduce vibration. Its 32-bit motherboard features four TMC 2209 drivers, while the linear...

The FLSUN Super Racer (SR) So Fast is a Delta 3D printer with three vertical axes and a metal frame that helps reduce vibration. Its 32-bit motherboard features four TMC 2209 drivers, while the linear guides, 10 mm belt and stepper motor support movement during printing. It is designed for printing models with PLA and ABS filament.

It features a dual-gear...

See full description See full description

Top specs

  • Consumable

    Filament

    Plastic filament (e.g. PLA, ABS, PETG) that is heated, melted, and deposited layer by layer to create objects in FDM 3D printers. Inexpensive, easy to use, wide variety of materials.

  • Type

    Assembled

    3D printer that requires assembly before use.
  • See all
451 36 €
Delivery by Mon, 09 Nov
80,00 €   shipping cost
Sent from Greece
From Top Electronics 4.9 (38)
4.9 (38 reviews)
Greece
1 piece
See 3D Printers & Accessories on the page of Top Electronics

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The FLSUN Super Racer (SR) So Fast is a Delta 3D printer with three vertical axes and a metal frame that helps reduce vibration. Its 32-bit motherboard features four TMC 2209 drivers, while the linear guides, 10 mm belt and stepper motor support movement during printing. It is designed for printing models with PLA and ABS filament.

It features a dual-gear direct-drive extruder and a Volcano Hotend, with two turbo fans and one cooling fan. The touchscreen supports eight languages and factory reset. Marlin 2.0.6 firmware supports print recovery after a power outage, filament runout detection and clog detection. The removable coated glass plate and separate aluminium plate make cleaning and maintenance easier. The layer height is 0.01–0.4 mm, the resolution is 0.05 mm, maximum power consumption is 300 W and the operating ambient temperature is 5–40 °C.

  • Printing technology: Delta, filament
  • Build volume: 260 × 260 × 330 mm
  • Maximum print speed: up to 150 mm/s
  • Nozzle: Volcano Hotend
  • Maximum nozzle temperature: 255 °C
  • Heated bed: up to 100 °C, with a removable coated glass plate
  • Printing materials: PLA and ABS filament, 1.75 mm diameter
  • Extruders: two, with direct-drive feed
  • Automatic levelling: yes
  • Display: 3.5-inch colour capacitive touchscreen
  • Connectivity: USB, micro-SD card
  • Assembly: required; 90% pre-assembled
  • Device dimensions: 390 × 960 × 440 mm
  • Weight: 13.6 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Type
Assembled

Type

Assembled
3D printer that requires assembly before use.
Extruder
Dual

Extruder

Thread extrusion mechanism. The dual and triple extruder help with printing in multiple colors and simultaneous printing of designs.
Consumable
Filament

Consumable

Filament

Plastic filament (e.g. PLA, ABS, PETG) that is heated, melted, and deposited layer by layer to create objects in FDM 3D printers. Inexpensive, easy to use, wide variety of materials.
Printing Technology
-
Auto-Leveling
No

Auto-Leveling

It is a system that automatically measures the surface of the print bed and adjusts the nozzle height, so that the first layer is properly laid without manual calibration.
Camera
No

Camera

The camera in 3D printers allows remote monitoring of the printing process in real time and checking for potential issues without physical presence.
Nozzle Temperature
-
Fully Enclosed
No

Fully Enclosed

The term Fully Enclosed refers to printers with a completely sealed chamber (panels, door, lid), which traps heat and prevents drafts. It is essential for avoiding warping in "difficult" materials such as ABS and ASA, while also reducing noise and odors.
Card Reader
No

Print Dimensions (Build Volume)

Width
260 mm
Length
260 mm
Height
330 mm

Printing

Maximum Print Speed
150 mm/s
Maximum Resolution
-

Dimensions

Height
440 mm
Width
390 mm
Length
960 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The FLSUN Super Racer (SR) So Fast is a Delta 3D printer with three vertical axes and a metal frame that helps reduce vibration. Its 32-bit motherboard features four TMC 2209 drivers, while the linear guides, 10 mm belt and stepper motor support movement during printing. It is designed for printing models with PLA and ABS filament.

It features a dual-gear direct-drive extruder and a Volcano Hotend, with two turbo fans and one cooling fan. The touchscreen supports eight languages and factory reset. Marlin 2.0.6 firmware supports print recovery after a power outage, filament runout detection and clog detection. The removable coated glass plate and separate aluminium plate make cleaning and maintenance easier. The layer height is 0.01–0.4 mm, the resolution is 0.05 mm, maximum power consumption is 300 W and the operating ambient temperature is 5–40 °C.

  • Printing technology: Delta, filament
  • Build volume: 260 × 260 × 330 mm
  • Maximum print speed: up to 150 mm/s
  • Nozzle: Volcano Hotend
  • Maximum nozzle temperature: 255 °C
  • Heated bed: up to 100 °C, with a removable coated glass plate
  • Printing materials: PLA and ABS filament, 1.75 mm diameter
  • Extruders: two, with direct-drive feed
  • Automatic levelling: yes
  • Display: 3.5-inch colour capacitive touchscreen
  • Connectivity: USB, micro-SD card
  • Assembly: required; 90% pre-assembled
  • Device dimensions: 390 × 960 × 440 mm
  • Weight: 13.6 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Type
Assembled

Type

Assembled
3D printer that requires assembly before use.
Extruder
Dual

Extruder

Thread extrusion mechanism. The dual and triple extruder help with printing in multiple colors and simultaneous printing of designs.
Consumable
Filament

Consumable

Filament

Plastic filament (e.g. PLA, ABS, PETG) that is heated, melted, and deposited layer by layer to create objects in FDM 3D printers. Inexpensive, easy to use, wide variety of materials.
Printing Technology
-
Auto-Leveling
No

Auto-Leveling

It is a system that automatically measures the surface of the print bed and adjusts the nozzle height, so that the first layer is properly laid without manual calibration.
Camera
No

Camera

The camera in 3D printers allows remote monitoring of the printing process in real time and checking for potential issues without physical presence.
Nozzle Temperature
-
Fully Enclosed
No

Fully Enclosed

The term Fully Enclosed refers to printers with a completely sealed chamber (panels, door, lid), which traps heat and prevents drafts. It is essential for avoiding warping in "difficult" materials such as ABS and ASA, while also reducing noise and odors.
Card Reader
No

Print Dimensions (Build Volume)

Width
260 mm
Length
260 mm
Height
330 mm

Printing

Maximum Print Speed
150 mm/s
Maximum Resolution
-

Dimensions

Height
440 mm
Width
390 mm
Length
960 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

451,36 €
80,00 €   shipping cost

FLSUN