Pumped liquid temperature: 0°C to 50 °C

Maximum operating pressure: 5 bar at +40 °C

Insulation/protection class: F / IP 44

Starts per hour: Up to 100 (at normal voltage 230V +/- 5%)

Pump description: For the three types, there is built-in protection and permanent running capacitor. Closed asynchronous motor, air-cooled, shaft seal with special mechanical seal (carbon).

Maximum diameter of incoming suspended solid particles: 3 mm

Maximum sand content in pumped water: 0.25%

Applications:

• Domestic pump (water supply, irrigation) specially designed with suction capacity from a lower height than the pump installation point without a cup (clapet) and high efficiency.
• Ideal for pumping clean water from wells, tanks, cisterns.
• Can be easily combined with a pressure controller (autokit or controlkit) or with the usual pressure tank or even with an inverter device to convert the current pump into a pressure group with adjustable speed according to water demand from the consumptions.

Features:

• Horizontal self-priming centrifugal pumps connected to an electric motor.
• Thermoplastic impeller.
• Mechanical seal (made of steel).

Performance:

• Flow rate 1 - 3.5 m3/h.
• Head up to 48 m.
• Electric motor power from 0.75kw.
• Closed, air-cooled, two-pole motors.
• Insulation class F, protection IP 55.
• Maximum suction depth 8m.
• Inlet - outlet port 1''.

Applications:

• Water supply from wells or tanks.
• Domestic or industrial use.
• Garden and irrigation.

Operating conditions:

• Water temperature up to 40 °C.
• Maximum sand content 0.25%.
• Maximum operating pressure up to 5 bar.