Skroutz.mt

Hayward Max EP Pool Water Pump Filter Single-Phase with Power 1.5hp and Maximum Supply 21900 lt/h
Pool Water Pumps

Hayward Max EP Pool Water Pump Filter Single-Phase with Power 1.5hp and Maximum Supply 21900 lt/h

Key features:

  • Maximum Flow: 21900 liters/hour
  • Power Supply: 220V
  • Connection Nozzles: Φ63
  • Maximum Water Temperature: 50°C
  • Maximum Operating Pressure: 2.5bar
  • Weight: 19Kg
See full description
  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Standard Domestic (50 to 90 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.

  • Speed

    Indicates how fast the motor spins (revolutions per minute) to move the water. This movement is necessary for filtering the pool and for properly distributing disinfectants so that the water does not turn green. The more revolutions, the more water is moved, but the more electricity the pump consumes and the more noise it makes.
  • Pump Weight 19 kg
  • See all
Review the product
Product report

Description

Description

Efficient pool hydraulic pump that provides superior flow and energy efficiency.

Benefits

  • Maximum Flow Rate: 21900 liters/hour
  • Power Supply: 220V
  • Connection Nozzles: Φ63
  • Maximum Water Temperature: 50°C
  • Maximum Operating Pressure: 2.5bar
  • Weight: 19Kg
  • Mechanical Seal AISI 316

Details

  • The Hayward EP 150 pump is ideal for circulating and filtering water in private and commercial pools up to 88,000 liters.
  • The pump body is made of glass fiber reinforced thermoplastic.
  • The impeller is made of noryl, equipped with a stainless steel wear ring.
  • The pump is equipped with an integrated pre-filter with a transparent polymeric cover on a threaded base.
  • The removable plastic basket is made of white plastic. During the installation of the pump, additional installation of a motor protection switch is required.

Engine Specifications

  • Class F, IP55, 50Hz, 2850rpm 
  • Housing / impeller / cover PP with FG, Noryl, PP, SAN

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Filter
Power (hp)
1.5 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Pump Weight
19 kg
Filter Included
No

Performance

Maximum Supply
21900 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Speed
2850 rpm

Speed

Indicates how fast the motor spins (revolutions per minute) to move the water. This movement is necessary for filtering the pool and for properly distributing disinfectants so that the water does not turn green. The more revolutions, the more water is moved, but the more electricity the pump consumes and the more noise it makes.

Installation

Connection Nozzle
63 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Efficient pool hydraulic pump that provides superior flow and energy efficiency.

Benefits

  • Maximum Flow Rate: 21900 liters/hour
  • Power Supply: 220V
  • Connection Nozzles: Φ63
  • Maximum Water Temperature: 50°C
  • Maximum Operating Pressure: 2.5bar
  • Weight: 19Kg
  • Mechanical Seal AISI 316

Details

  • The Hayward EP 150 pump is ideal for circulating and filtering water in private and commercial pools up to 88,000 liters.
  • The pump body is made of glass fiber reinforced thermoplastic.
  • The impeller is made of noryl, equipped with a stainless steel wear ring.
  • The pump is equipped with an integrated pre-filter with a transparent polymeric cover on a threaded base.
  • The removable plastic basket is made of white plastic. During the installation of the pump, additional installation of a motor protection switch is required.

Engine Specifications

  • Class F, IP55, 50Hz, 2850rpm 
  • Housing / impeller / cover PP with FG, Noryl, PP, SAN

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Filter
Power (hp)
1.5 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Pump Weight
19 kg
Filter Included
No

Performance

Maximum Supply
21900 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Speed
2850 rpm

Speed

Indicates how fast the motor spins (revolutions per minute) to move the water. This movement is necessary for filtering the pool and for properly distributing disinfectants so that the water does not turn green. The more revolutions, the more water is moved, but the more electricity the pump consumes and the more noise it makes.

Installation

Connection Nozzle
63 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

463,76 €
23,00 €   shipping cost