Skroutz.mt

Yohe Motorcycle Helmet Full Face ECE 22.06 with Sun Visor
Motorcycle Helmets

Yohe Motorcycle Helmet Full Face ECE 22.06 with Sun Visor Code: 910-BLM

Material: High-strength thermoplastic ABS shell

Available sizes:

  • 2 different shells: (XS-S) + (M-XXL)

Ventilation:

  • 4 air vents (2 on the chin and 2 on the top of the helmet), adjustable
  • 2 air...

Material: High-strength thermoplastic ABS shell

Available sizes:

  • 2 different shells: (XS-S) + (M-XXL)

Ventilation:

  • 4 air vents (2 on the chin and 2 on the top of the helmet), adjustable
  • 2 air exhaust points at the back

Interior:

  • Fully removable and washable hypoallergenic interior

Visor:

  • Transparent Anti-Scratch 2.2mm thick
  • Central visor lock
  • Quick...
See full description See full description

  • Type

    Full Face

    The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Material: High-strength thermoplastic ABS shell

Available sizes:

  • 2 different shells: (XS-S) + (M-XXL)

Ventilation:

  • 4 air vents (2 on the chin and 2 on the top of the helmet), adjustable
  • 2 air exhaust points at the back

Interior:

  • Fully removable and washable hypoallergenic interior

Visor:

  • Transparent Anti-Scratch 2.2mm thick
  • Central visor lock
  • Quick and easy visor replacement
  • Internal tinted sun visor with easy-to-use mechanism and UV protection
  • PinLock ready (not included)

Fastening: Micrometric

Includes: Chin curtain and breath guard

Weight: 1550+/-50gr

Certification: ECE 22.06

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
910-BLM

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.
Chin Curtain
Yes

Chin Curtain

The helmet has a special fabric at the chin area. It helps to reduce airflow and noise.
Breath Guard
Yes

Breath Guard

It is an additional helmet ventilation accessory that prevents fogging on the visor caused by nose exhalation. It is quite useful during the winter months and in rainy conditions.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Material: High-strength thermoplastic ABS shell

Available sizes:

  • 2 different shells: (XS-S) + (M-XXL)

Ventilation:

  • 4 air vents (2 on the chin and 2 on the top of the helmet), adjustable
  • 2 air exhaust points at the back

Interior:

  • Fully removable and washable hypoallergenic interior

Visor:

  • Transparent Anti-Scratch 2.2mm thick
  • Central visor lock
  • Quick and easy visor replacement
  • Internal tinted sun visor with easy-to-use mechanism and UV protection
  • PinLock ready (not included)

Fastening: Micrometric

Includes: Chin curtain and breath guard

Weight: 1550+/-50gr

Certification: ECE 22.06

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
910-BLM

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.
Chin Curtain
Yes

Chin Curtain

The helmet has a special fabric at the chin area. It helps to reduce airflow and noise.
Breath Guard
Yes

Breath Guard

It is an additional helmet ventilation accessory that prevents fogging on the visor caused by nose exhalation. It is quite useful during the winter months and in rainy conditions.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.