Skroutz.mt

Yohe SV Motorcycle Helmet Jet ECE 22.06
Motorcycle Helmets

Yohe SV Motorcycle Helmet Jet ECE 22.06 Code: 86801000123

YOHE HELMETS 868-2 SV MATT BLACK JET HELMET

  • Category: Open-face (3/4) for urban use and short to medium range travels with an internal anti-sunglare tinted visor.
  • Thermoplastic shell in 2 sizes made...

YOHE HELMETS 868-2 SV MATT BLACK JET HELMET

  • Category: Open-face (3/4) for urban use and short to medium range travels with an internal anti-sunglare tinted visor.
  • Thermoplastic shell in 2 sizes made of high-strength primary ABS, with added controlled hardness, structurally reinforced and protected with a varnish against UV radiation.
  • Multi-density...
See full description See full description

  • Type

    Jet

    The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt
  • See all

Size

Yohe size guide
Yohe size guide

Size

Yohe size guide
International
Product report

Description

Description

YOHE HELMETS 868-2 SV MATT BLACK JET HELMET

  • Category: Open-face (3/4) for urban use and short to medium range travels with an internal anti-sunglare tinted visor.
  • Thermoplastic shell in 2 sizes made of high-strength primary ABS, with added controlled hardness, structurally reinforced and protected with a varnish against UV radiation.
  • Multi-density polystyrene (EPS) for maximum impact absorption.
  • Advanced aerodynamic design, tested in a wind tunnel simulator.
  • Specially designed internally for a perfect fit.
  • Quick-release visor system with absolute waterproofing.
  • Anti-scratch visor with a thickness of 2.2 mm, providing protection against UV radiation.
  • Fully removable, washable, and interchangeable antibacterial - hypoallergenic 3D Soft lining of high quality.
  • Specially designed internal sides for the use of optical or sunglasses.
  • Pre-shaped internally for intercom use and for the installation of headsets – speakers.
  • Improved dynamic ventilation system with 2 upper side air vents.
  • Closure system with a micrometric steel quick-release buckle - multi-position unbuckling.
  • Certified according to ECE R 22.06 (EU) standards.
  • Weight: 1450±50g (Size L).

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
86801000123

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 4
    1 out of 1 members found this review helpful
    George_Valiris

    Verified purchase

    A little difficult to install, but perfect afterwards.

    Translated from Greek ·
    Did you find this review helpful?

Description & Specifications

YOHE HELMETS 868-2 SV MATT BLACK JET HELMET

  • Category: Open-face (3/4) for urban use and short to medium range travels with an internal anti-sunglare tinted visor.
  • Thermoplastic shell in 2 sizes made of high-strength primary ABS, with added controlled hardness, structurally reinforced and protected with a varnish against UV radiation.
  • Multi-density polystyrene (EPS) for maximum impact absorption.
  • Advanced aerodynamic design, tested in a wind tunnel simulator.
  • Specially designed internally for a perfect fit.
  • Quick-release visor system with absolute waterproofing.
  • Anti-scratch visor with a thickness of 2.2 mm, providing protection against UV radiation.
  • Fully removable, washable, and interchangeable antibacterial - hypoallergenic 3D Soft lining of high quality.
  • Specially designed internal sides for the use of optical or sunglasses.
  • Pre-shaped internally for intercom use and for the installation of headsets – speakers.
  • Improved dynamic ventilation system with 2 upper side air vents.
  • Closure system with a micrometric steel quick-release buckle - multi-position unbuckling.
  • Certified according to ECE R 22.06 (EU) standards.
  • Weight: 1450±50g (Size L).

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
86801000123

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 4
    1 out of 1 members found this review helpful
    George_Valiris

    Verified purchase

    A little difficult to install, but perfect afterwards.

    Translated from Greek ·
    Did you find this review helpful?
69,90 €
23,00 €   shipping cost