WATER-REPELLENT AND OIL-REPELLENT NANOTECHNOLOGY IMPREGNATION TRANSPARENT

Water-repellent and oil-repellent impregnation with a nanomolecular structure, solvent-free silicone-based for the protection of absorbent and very low absorbency substrates.

Characteristics:

• Does not cause color alterations
• Creates a protective barrier against harmful agents such as pollutants, soot, humidity, fats, oils, and ice
• Has a long lifespan
• Exhibits great resistance to direct sunlight
• Is an eco-friendly material

Application surfaces:

• On ceramic tiles for easy care and cleaning.
• On natural stones of high, medium, and low porosity, e.g., marble, granite, and all types of natural stones.
• Treatment of cementitious base artificial stone or fiber cement to prevent color alteration.
• Treatment of concrete surfaces for waterproofing as well as for easier removal of dust, grease, graffiti, posters, etc.

Where to use it: On any interior & exterior surface, horizontal or vertical.

Coverage (Consumption): 50-100 ml/m² for 2 layers, depending on the porosity of the surface.

Application: Brush, roller, air pressure gun, airless sprayer ensuring that the material spreads evenly and does not pool. It is recommended to apply NANOLINE 900 W in 2 coats.

Dilution: Ready to use.

Cleaning: Immediately after use, clean tools with water and soap.

Drying time at 23°C: 45 minutes (touch dry) - 5-6 hours (fully dry).

Repainting: The second coat is applied over the first when it has sufficiently absorbed but before it is fully dry within 1-2 hours (wet on wet application). Ensure the material is spread evenly so that the surface absorbs as much as possible and all gaps are covered.

Gloss level: Mat.

Shades: Transparent.

Packaging: 1kg, 5kg, 20kg.