Skroutz.mt

Fronius Welding Machine Inverter TIG with Maximum Welding Current 230A and Duty Cycle 35%
Welding Machines

Fronius Welding Machine Inverter TIG with Maximum Welding Current 230A and Duty Cycle 35%

Top quality – for every weld and every material: with targeted heat input and improved ignition function, the iWave gives you maximum control of your arc, significantly reducing ignition delays.

All...

Top quality – for every weld and every material: with targeted heat input and improved ignition function, the iWave gives you maximum control of your arc, significantly reducing ignition delays.

All operating controls of the iWave series are also designed for maximum control. This makes the systems intuitive to use, leaving you free to focus solely on the...

See full description See full description

  • Welding Current

    230

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
5642 00 €
Delivery by Mon, 29 Jun
65,00 €   shipping cost
Sent from Greece
From Tools4pro
Greece
1 piece
See Tools on the page of Tools4pro
Review the product
Product report

Description

Description

Top quality – for every weld and every material: with targeted heat input and improved ignition function, the iWave gives you maximum control of your arc, significantly reducing ignition delays.

All operating controls of the iWave series are also designed for maximum control. This makes the systems intuitive to use, leaving you free to focus solely on the challenges of the welding job.

Do you need a system that can handle the full range of welding challenges? If so, the iWave is the perfect choice: in addition to offering every TIG function imaginable, it also accommodates all MIG/MAG welding process variations.

  • iWAVE: COMPLETE FREEDOM TO UNLEASH WELDING POTENTIAL.
  • iWave 230i DC or iWave 230i AC/DC
  • 3-230 A (TIG)
  • 230 V single-phase or 120-230 V single-phase

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
TIG

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
230 A

Welding Current (max): 230


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
35 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Weight
20000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
Yes

with Voltage Stabilizer


It detects fluctuations in the supply voltage and corrects them in real-time, resulting in a stable output voltage, improving the machine's lifespan and the quality of the welding.
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
Yes

Spot Function


Applies a specific amount of current for a very short duration, creating a spot weld.
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Top quality – for every weld and every material: with targeted heat input and improved ignition function, the iWave gives you maximum control of your arc, significantly reducing ignition delays.

All operating controls of the iWave series are also designed for maximum control. This makes the systems intuitive to use, leaving you free to focus solely on the challenges of the welding job.

Do you need a system that can handle the full range of welding challenges? If so, the iWave is the perfect choice: in addition to offering every TIG function imaginable, it also accommodates all MIG/MAG welding process variations.

  • iWAVE: COMPLETE FREEDOM TO UNLEASH WELDING POTENTIAL.
  • iWave 230i DC or iWave 230i AC/DC
  • 3-230 A (TIG)
  • 230 V single-phase or 120-230 V single-phase

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
TIG

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
230 A

Welding Current (max): 230


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
35 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Weight
20000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
Yes

with Voltage Stabilizer


It detects fluctuations in the supply voltage and corrects them in real-time, resulting in a stable output voltage, improving the machine's lifespan and the quality of the welding.
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
Yes

Spot Function


Applies a specific amount of current for a very short duration, creating a spot weld.
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

5.642,00 €
65,00 €   shipping cost