Giolli Acquateax Impregnante Cerato water-based wood stain protects indoor and outdoor wooden surfaces from moisture and ultraviolet radiation. Its non-film-forming formula penetrates the wood without creating a film, preserving its natural texture and allowing it to breathe. It has a matte finish in a dark walnut shade.
Suitable for window frames, beams, fences, pergolas, wooden cladding and outdoor furniture. Two coats are recommended on new or absorbent surfaces, with coverage of approximately 14–18 m²/litre per coat. Apply with a brush, roller, cloth or spray gun. Clean tools with water and mild soap immediately after use.
- Type: Penetrating wood stain
- Thinner: Water
- Suitable for: Wooden surfaces
- Colour: Dark walnut
- Gloss level: Matte
- Protection: Against moisture and ultraviolet radiation
- Application: With a brush, roller, cloth or spray gun
- Coats: 2 on new or absorbent surfaces
- Coverage: Approximately 14–18 m²/litre per coat
- Touch-dry: Approximately 60 minutes at 23 °C
- Recoating: After approximately 5 hours
- Fully dry: After approximately 24 hours at 23 °C
- Volume: 0.75 l
- Product Number
- 0226607.007
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Matte
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- No
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Dark Walnut
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.