Skroutz.mt

Waterproof LED Strip GreenTec 220V Warm White Light 1m Type SMD2835
LED Strips

Waterproof LED Strip GreenTec 220V Warm White Light 1m Type SMD2835 Code: LE-01-020

Waterproof LED strip of high durability and brightness, ideal for concealed lighting in gypsum board ceiling, kitchen lighting, workspace lighting, etc.

IP65 waterproofing: A plastic (silicone)...

Waterproof LED strip of high durability and brightness, ideal for concealed lighting in gypsum board ceiling, kitchen lighting, workspace lighting, etc.

IP65 waterproofing: A plastic (silicone) transparent coating protects the entire LED strip 360 degrees, enclosing it within a silicone coating. This waterproofing is considered better if the strip is not...

See full description See full description

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    220V

    The LED film is connected to the socket with a voltage of 220 volts, which is the household current voltage. In case the power supply is not included in the package, you will need to purchase it separately.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP65

    LED films with an IP65 rating are mainly used in bathrooms and kitchens and have complete protection against splashes, steam, and occasional humidity. They also have high protection against dust.

  • Light Shade

    Warm White

    The warm white is measured in Kelvin scale with values ranging from 2400K to 3000K. The tones of white are more yellowish compared to natural light.
  • See all
Review the product
Product report

Description

Description

Waterproof LED strip of high durability and brightness, ideal for concealed lighting in gypsum board ceiling, kitchen lighting, workspace lighting, etc.

IP65 waterproofing: A plastic (silicone) transparent coating protects the entire LED strip 360 degrees, enclosing it within a silicone coating. This waterproofing is considered better if the strip is not cut. However, it is stiffer than IP54 and cannot be used underwater.

Specifications:

  • LED strip
  • Voltage: 220 V
  • WATT / meter: 14W/m
  • Duration: 30,000 hours
  • Light color: 3000K warm white light
  • Brightness: 5520± 5% lm
  • Beam angle: 180°
  • Waterproof depth: IP65
  • Dimensions (WxH): 21x10 mm
  • Energy class: A+
  • Certification: CE, ROHS
  • Number of LEDs per meter: 276LED/m
  • Cutting capability: Yes every 50 cm

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
LE-01-020

Dimensions

Length
1 m
Power Source
220V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

220V

The LED film is connected to the socket with a voltage of 220 volts, which is the household current voltage. In case the power supply is not included in the package, you will need to purchase it separately.
Light Colour
Warm White

Light Colour

Warm White

The warm white is measured in Kelvin scale with values ranging from 2400K to 3000K. The tones of white are more yellowish compared to natural light.
White Temperature
3000 K
Protection Certification
IP65

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP65
LED films with an IP65 rating are mainly used in bathrooms and kitchens and have complete protection against splashes, steam, and occasional humidity. They also have high protection against dust.
USB
No

Additional Features

LED type
SMD2835

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD2835
It is a 2.8mm wide and 3.5mm long led type. They are suitable for indoor lighting. The 2835s are brighter than the 3528s and can provide much more light.
LED Density
276 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
14 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Waterproof LED strip of high durability and brightness, ideal for concealed lighting in gypsum board ceiling, kitchen lighting, workspace lighting, etc.

IP65 waterproofing: A plastic (silicone) transparent coating protects the entire LED strip 360 degrees, enclosing it within a silicone coating. This waterproofing is considered better if the strip is not cut. However, it is stiffer than IP54 and cannot be used underwater.

Specifications:

  • LED strip
  • Voltage: 220 V
  • WATT / meter: 14W/m
  • Duration: 30,000 hours
  • Light color: 3000K warm white light
  • Brightness: 5520± 5% lm
  • Beam angle: 180°
  • Waterproof depth: IP65
  • Dimensions (WxH): 21x10 mm
  • Energy class: A+
  • Certification: CE, ROHS
  • Number of LEDs per meter: 276LED/m
  • Cutting capability: Yes every 50 cm

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
Product Number
LE-01-020

Dimensions

Length
1 m
Power Source
220V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

220V

The LED film is connected to the socket with a voltage of 220 volts, which is the household current voltage. In case the power supply is not included in the package, you will need to purchase it separately.
Light Colour
Warm White

Light Colour

Warm White

The warm white is measured in Kelvin scale with values ranging from 2400K to 3000K. The tones of white are more yellowish compared to natural light.
White Temperature
3000 K
Protection Certification
IP65

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP65
LED films with an IP65 rating are mainly used in bathrooms and kitchens and have complete protection against splashes, steam, and occasional humidity. They also have high protection against dust.
USB
No

Additional Features

LED type
SMD2835

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD2835
It is a 2.8mm wide and 3.5mm long led type. They are suitable for indoor lighting. The 2835s are brighter than the 3528s and can provide much more light.
LED Density
276 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
14 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

4,00 €
14,00 €   shipping cost