Skroutz.mt

Scorpion Exo-combat Ii Motorcycle Helmet Modular ECE 22.06 with Sunvisor
Motorcycle Helmets

Scorpion Exo-combat Ii Motorcycle Helmet Modular ECE 22.06 with Sunvisor Code: 182-100-10

The Scorpion Exo-combat II helmet is designed to provide maximum safety and comfort while riding your motorcycle. It is modular, meaning you can convert it from a full-face to a jet helmet, allowing...

The Scorpion Exo-combat II helmet is designed to provide maximum safety and comfort while riding your motorcycle. It is modular, meaning you can convert it from a full-face to a jet helmet, allowing you to adjust your experience according to your needs.

Made from polycarbonate, this helmet is lightweight and durable, offering basic protection through the...

See full description See full description

  • Type

    Modular

    Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.

  • Material

    Polycarbonate

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt
  • See all

Size

Scorpion size guide
Scorpion size guide

Size

Scorpion size guide
International
Product report

Description

Description

The Scorpion Exo-combat II helmet is designed to provide maximum safety and comfort while riding your motorcycle. It is modular, meaning you can convert it from a full-face to a jet helmet, allowing you to adjust your experience according to your needs.

Made from polycarbonate, this helmet is lightweight and durable, offering basic protection through the deformation of the shell in case of impact. It is certified with ECE 22.06, which means it has been tested according to strict safety standards and confirms its ability to protect in real-world conditions.

Additionally, the helmet features:

  • Black color for a classic and stylish appearance.
  • Internal sun visor that retracts downward, providing protection from the sun.
  • Removable and washable inner padding for easy cleaning and maintenance.
  • Microlock fastening system for easy putting on and taking off the helmet.
  • Non-Pinlock support system, meaning it does not have internal slots for anti-fog protection.
  • Without Bluetooth to maintain a simple design.

With this helmet, you can enjoy safe and comfortable rides on your motorcycle, always remembering to ride responsibly.

Made from polycarbonate, this helmet is lightweight and durable, offering basic protection through shell deformation in the event of an impact. It is ECE 22.06 certified, which means it has been tested according to strict safety standards and confirms its ability to protect in real-world conditions.

  • Black color for a classic and elegant look.
  • Internal sun visor that slides down, offering protection from the sun.
  • Removable and washable inner lining for easy cleaning and maintenance.
  • Microlock fastening mechanism for easy placement and removal of the helmet.
  • No Pinlock system support, meaning it does not have internal slots for anti-fog protection.
  • No Bluetooth to maintain the simplicity of the design.
  • With this helmet, you can enjoy safe and comfortable rides on your motorcycle, always remembering to ride responsibly.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
182-100-10

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Color Finish
Matt
Material
Polycarbonate

Material

Polycarbonate
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

The Scorpion Exo-combat II helmet is designed to provide maximum safety and comfort while riding your motorcycle. It is modular, meaning you can convert it from a full-face to a jet helmet, allowing you to adjust your experience according to your needs.

Made from polycarbonate, this helmet is lightweight and durable, offering basic protection through the deformation of the shell in case of impact. It is certified with ECE 22.06, which means it has been tested according to strict safety standards and confirms its ability to protect in real-world conditions.

Additionally, the helmet features:

  • Black color for a classic and stylish appearance.
  • Internal sun visor that retracts downward, providing protection from the sun.
  • Removable and washable inner padding for easy cleaning and maintenance.
  • Microlock fastening system for easy putting on and taking off the helmet.
  • Non-Pinlock support system, meaning it does not have internal slots for anti-fog protection.
  • Without Bluetooth to maintain a simple design.

With this helmet, you can enjoy safe and comfortable rides on your motorcycle, always remembering to ride responsibly.

Made from polycarbonate, this helmet is lightweight and durable, offering basic protection through shell deformation in the event of an impact. It is ECE 22.06 certified, which means it has been tested according to strict safety standards and confirms its ability to protect in real-world conditions.

  • Black color for a classic and elegant look.
  • Internal sun visor that slides down, offering protection from the sun.
  • Removable and washable inner lining for easy cleaning and maintenance.
  • Microlock fastening mechanism for easy placement and removal of the helmet.
  • No Pinlock system support, meaning it does not have internal slots for anti-fog protection.
  • No Bluetooth to maintain the simplicity of the design.
  • With this helmet, you can enjoy safe and comfortable rides on your motorcycle, always remembering to ride responsibly.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
182-100-10

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Color Finish
Matt
Material
Polycarbonate

Material

Polycarbonate
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
226,59 €
20,00 €   shipping cost