Skroutz.mt

Muhler Wall Mounted Electric Single-Phase Instant Heater Tap for Bathroom 3.6kW
Instant Water Heaters & Instant Heater Taps

Muhler Wall Mounted Electric Single-Phase Instant Heater Tap for Bathroom 3.6kW Code: MH-7033T

The Muhler MH-7033T instant water heater heats water in just a few seconds, with no preheating required. The water temperature can be adjusted from 30 °C to 60 °C and is shown on an LED display. It is...

The Muhler MH-7033T instant water heater heats water in just a few seconds, with no preheating required. The water temperature can be adjusted from 30 °C to 60 °C and is shown on an LED display. It is designed to operate at low water pressure, from 0.04 MPa to 0.5 MPa.

  • Power supply: Electric, single-phase
  • Maximum power: 3.6 kW
  • Voltage: 220–240 V
  • Frequency:...
See full description See full description
44 25 €
Delivery by Thu, 12 Nov
14,00 €   shipping cost
Sent from Greece
From Online-mall 4.9 (62)
4.9 (62 reviews)
Greece
5+ pieces
See Water Heaters on the page of Online-mall

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Product report

Description

Description

The Muhler MH-7033T instant water heater heats water in just a few seconds, with no preheating required. The water temperature can be adjusted from 30 °C to 60 °C and is shown on an LED display. It is designed to operate at low water pressure, from 0.04 MPa to 0.5 MPa.

  • Power supply: Electric, single-phase
  • Maximum power: 3.6 kW
  • Voltage: 220–240 V
  • Frequency: 50–60 Hz
  • Maximum water temperature: 60 °C
  • Temperature adjustment: From 30 °C to 60 °C
  • Temperature display: LED
  • Operating water pressure: 0.04–0.5 MPa
  • Installation: Wall-mounted
  • Use: Bathroom
  • Height: 18 cm
  • Width: 7 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
MH-7033T

Product Details

Power Source
Electric Single Phase
Maximum Power
3.6 kW

Maximum Power

The higher the power of the water heater, the faster the water can be heated and therefore the greater the flow of water at the selected temperature.

2. Those with a power of up to 5-6kw are usually used in a sink, while those intended for use in the shower usually have a power greater than 10kw.
Maximum Flow Rate
-
Maximum Temperature
60 °C

Maximum Temperature

As an indication, 38-42 °C degrees are usually used for a hot shower.
Temperature Setting
Degrees °C
Placement
Bathroom
Wall Mounted
Yes
Inverter
No
Remote Control
No

Energy Label

Energy Class
-

Dimensions

Height
18 cm
Width
7 cm
Length
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

1.0
1
1.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product

Description & Specifications

The Muhler MH-7033T instant water heater heats water in just a few seconds, with no preheating required. The water temperature can be adjusted from 30 °C to 60 °C and is shown on an LED display. It is designed to operate at low water pressure, from 0.04 MPa to 0.5 MPa.

  • Power supply: Electric, single-phase
  • Maximum power: 3.6 kW
  • Voltage: 220–240 V
  • Frequency: 50–60 Hz
  • Maximum water temperature: 60 °C
  • Temperature adjustment: From 30 °C to 60 °C
  • Temperature display: LED
  • Operating water pressure: 0.04–0.5 MPa
  • Installation: Wall-mounted
  • Use: Bathroom
  • Height: 18 cm
  • Width: 7 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
MH-7033T

Product Details

Power Source
Electric Single Phase
Maximum Power
3.6 kW

Maximum Power

The higher the power of the water heater, the faster the water can be heated and therefore the greater the flow of water at the selected temperature.

2. Those with a power of up to 5-6kw are usually used in a sink, while those intended for use in the shower usually have a power greater than 10kw.
Maximum Flow Rate
-
Maximum Temperature
60 °C

Maximum Temperature

As an indication, 38-42 °C degrees are usually used for a hot shower.
Temperature Setting
Degrees °C
Placement
Bathroom
Wall Mounted
Yes
Inverter
No
Remote Control
No

Energy Label

Energy Class
-

Dimensions

Height
18 cm
Width
7 cm
Length
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

1.0
1
1.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
44,25 €
14,00 €   shipping cost