Skroutz.mt

Makita Single-phase Pump Waste Water / Sewage 0.6hp PF0403
Submersible Water Pumps

Makita Single-phase Pump Waste Water / Sewage 0.6hp PF0403

RAIN WATER PUMP MAKITA 400W PF0403

  • Power: 400 W
  • Number of revolutions: 2800 rpm
  • Pumping capacity (max): 7,200 lt/h
  • Manometric (max): 6.5 m
  • Submersion depth (max): 5 m
  • Particle size (max): Φ 5mm
  • Water...

RAIN WATER PUMP MAKITA 400W PF0403

  • Power: 400 W
  • Number of revolutions: 2800 rpm
  • Pumping capacity (max): 7,200 lt/h
  • Manometric (max): 6.5 m
  • Submersion depth (max): 5 m
  • Particle size (max): Φ 5mm
  • Water level (min): 25 mm
  • Outlet: 1"-", 1/4"-1", 1/2"
  • Cable length: 10 m
  • Pump body: inox
  • Weight: 4.38 Kg
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    6.5

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

User Manual

The product is not available for shipping to the selected country.
Product report

Description

Description

RAIN WATER PUMP MAKITA 400W PF0403

  • Power: 400 W
  • Number of revolutions: 2800 rpm
  • Pumping capacity (max): 7,200 lt/h
  • Manometric (max): 6.5 m
  • Submersion depth (max): 5 m
  • Particle size (max): Φ 5mm
  • Water level (min): 25 mm
  • Outlet: 1"-", 1/4"-1", 1/2"
  • Cable length: 10 m
  • Pump body: inox
  • Weight: 4.38 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.6 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
450 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
-
Motor Rotation Speed
2800 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1/2", 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
6.5 m

Maximum Head Height: 6.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
5 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (13)

Reviews

4.2
13
4.2
Review this product
  1. 7
  2. 3
  3. 3 stars
    0
  4. 1
  5. 2
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • GEORGIOS Τ
    2
    GEORGIOS Τ

    VERY POWERFUL 750watt 1 HORSEPOWER SINGLE-PHASE CAN DRAW SEWAGE AND WATER FROM UNDERGROUND UP TO 2 CENTIMETERS it works and activates with a float and has a motor without brushes to work long-term without needing maintenance price 92€ you can use a one-inch 26 millimeters spiral hose or if you want you can use a larger one-inch and a quarter, that is 32 mm. WARNING!!!!!! AFTER TESTING!!!!! for the pump to be able to work in a basement, what is written about the 2 centimeters does not apply!!!!! it must have reached at least 20 centimeters!!!!! otherwise the pump cannot load and draw water, meaning the basement must be flooded at least 20 centimeters and then it will start

    Translated from Greek ·
    3
  • michalis42
    5
    michalis42

    It does its job perfectly after two years of use. Yesterday we emptied a cistern with a depth of 4 meters. It worked perfectly.

    Translated from Greek ·
    0
  • flamegou1000
    1
    flamegou1000

    It doesn't pull anything, imagine I have the 1000w and it doesn't have the power to throw the water like it's peeing!!!! Waste of money, I'm thinking about the 300 for crying

    Translated from Greek ·
    0
  • 1
    javla

    It broke after 1 month of connection

    Translated from Greek ·
    0
  • 5
    Θάσος

    It lasts after 2 years.

    Translated from Greek ·
    0
  • See all

Description & Specifications

RAIN WATER PUMP MAKITA 400W PF0403

  • Power: 400 W
  • Number of revolutions: 2800 rpm
  • Pumping capacity (max): 7,200 lt/h
  • Manometric (max): 6.5 m
  • Submersion depth (max): 5 m
  • Particle size (max): Φ 5mm
  • Water level (min): 25 mm
  • Outlet: 1"-", 1/4"-1", 1/2"
  • Cable length: 10 m
  • Pump body: inox
  • Weight: 4.38 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.6 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
450 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
-
Motor Rotation Speed
2800 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1/2", 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
6.5 m

Maximum Head Height: 6.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
5 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (13)

4.2
13
4.2
Review this product
  1. 7
  2. 3
  3. 3 stars
    0
  4. 1
  5. 2
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • GEORGIOS Τ
    2
    GEORGIOS Τ

    VERY POWERFUL 750watt 1 HORSEPOWER SINGLE-PHASE CAN DRAW SEWAGE AND WATER FROM UNDERGROUND UP TO 2 CENTIMETERS it works and activates with a float and has a motor without brushes to work long-term without needing maintenance price 92€ you can use a one-inch 26 millimeters spiral hose or if you want you can use a larger one-inch and a quarter, that is 32 mm. WARNING!!!!!! AFTER TESTING!!!!! for the pump to be able to work in a basement, what is written about the 2 centimeters does not apply!!!!! it must have reached at least 20 centimeters!!!!! otherwise the pump cannot load and draw water, meaning the basement must be flooded at least 20 centimeters and then it will start

    Translated from Greek ·
    3
  • michalis42
    5
    michalis42

    It does its job perfectly after two years of use. Yesterday we emptied a cistern with a depth of 4 meters. It worked perfectly.

    Translated from Greek ·
    0
  • flamegou1000
    1
    flamegou1000

    It doesn't pull anything, imagine I have the 1000w and it doesn't have the power to throw the water like it's peeing!!!! Waste of money, I'm thinking about the 300 for crying

    Translated from Greek ·
    0
  • 1
    javla

    It broke after 1 month of connection

    Translated from Greek ·
    0
  • 5
    Θάσος

    It lasts after 2 years.

    Translated from Greek ·
    0
  • See all