Skroutz.mt

Pentax DTR 101T Three-phase Pump Waste Water / Sewage 1.6hp 113140038
Submersible Water Pumps

Pentax DTR 101T Three-phase Pump Waste Water / Sewage 1.6hp 113140038

Submersible Pump with Grinder DTR 101T PENTAX

Drainage pump with an open impeller characterized by high head, depending on the type and size of the machine. The chopping system (grinder) allows for...

Submersible Pump with Grinder DTR 101T PENTAX

Drainage pump with an open impeller characterized by high head, depending on the type and size of the machine. The chopping system (grinder) allows for the fragmentation of pumped liquids that contain suspended fibrous materials and nematode bodies.

  • Cast iron body
  • Stainless steel shell, base support
  • Brass...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Three-Phase

    It is mainly used for pumps and other industrial devices that require greater power or higher efficiency. Three-phase power supply is ideal for large installations or applications with increased energy demands.

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Submersible Pump with Grinder DTR 101T PENTAX

Drainage pump with an open impeller characterized by high head, depending on the type and size of the machine. The chopping system (grinder) allows for the fragmentation of pumped liquids that contain suspended fibrous materials and nematode bodies.

  • Cast iron body
  • Stainless steel shell, base support
  • Brass impeller
  • Double sealing with oil barrier, silicon carbide on the pump side, sealing ring on the motor side
  • Stainless Steel Motor Shaft AISI 430
  • Grinder made of stainless steel AISI 440C
  • Liquid Temperature: 0 - 40°C
  • Float switch & 10 m H07 RN8F cable
  • Two-pole motor with thermal protection
  • Protection rating IP68, insulation class F
  • Type: Sewage with Grinder
  • Power: 1200W
  • Outlet: 1½”
  • Voltage: 3 x 400V
  • Flow Q K/Ω (m3/h): 50 ÷ 220
  • Manometric Head H (m): 17.1 ÷ 4.9
  • Flow Q K/Ω (m3/h): 0, 50, 100, 150, 200, 220
  • Manometric Head H (m): 19, 17.1, 14.8, 11.9, 7.8, 4.9

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Three-Phase

Voltage

Three-Phase

It is mainly used for pumps and other industrial devices that require greater power or higher efficiency. Three-phase power supply is ideal for large installations or applications with increased energy demands.
Horsepower
1.6 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1200 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Submersible Pump with Grinder DTR 101T PENTAX

Drainage pump with an open impeller characterized by high head, depending on the type and size of the machine. The chopping system (grinder) allows for the fragmentation of pumped liquids that contain suspended fibrous materials and nematode bodies.

  • Cast iron body
  • Stainless steel shell, base support
  • Brass impeller
  • Double sealing with oil barrier, silicon carbide on the pump side, sealing ring on the motor side
  • Stainless Steel Motor Shaft AISI 430
  • Grinder made of stainless steel AISI 440C
  • Liquid Temperature: 0 - 40°C
  • Float switch & 10 m H07 RN8F cable
  • Two-pole motor with thermal protection
  • Protection rating IP68, insulation class F
  • Type: Sewage with Grinder
  • Power: 1200W
  • Outlet: 1½”
  • Voltage: 3 x 400V
  • Flow Q K/Ω (m3/h): 50 ÷ 220
  • Manometric Head H (m): 17.1 ÷ 4.9
  • Flow Q K/Ω (m3/h): 0, 50, 100, 150, 200, 220
  • Manometric Head H (m): 19, 17.1, 14.8, 11.9, 7.8, 4.9

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Three-Phase

Voltage

Three-Phase

It is mainly used for pumps and other industrial devices that require greater power or higher efficiency. Three-phase power supply is ideal for large installations or applications with increased energy demands.
Horsepower
1.6 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1200 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.