Skroutz.mt

Kef R8 Meta Pair of Passive Hi-Fi Wall Mounted Speakers 150W 2 Way P17.5xW25.9xH17.4cm Brown
Passive Hi-Fi speakers

Kef R8 Meta Pair of Passive Hi-Fi Wall Mounted Speakers 150W 2 Way P17.5xW25.9xH17.4cm Brown

The R8 Meta can function as a rear speaker with its built-in wall mounting capability, or be placed on top of another speaker to produce Dolby Atmos sound by reflecting sound from the ceiling. It...

The R8 Meta can function as a rear speaker with its built-in wall mounting capability, or be placed on top of another speaker to produce Dolby Atmos sound by reflecting sound from the ceiling. It features a 12th generation Uni-Q system with MAT technology for precise sound direction, resulting in genuine three-dimensional sound reproduction.

The R series is...

See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The R8 Meta can function as a rear speaker with its built-in wall mounting capability, or be placed on top of another speaker to produce Dolby Atmos sound by reflecting sound from the ceiling. It features a 12th generation Uni-Q® system with MAT technology for precise sound direction, resulting in genuine three-dimensional sound reproduction.

The R series is designed to be acoustically exceptional. Every element of the design has been finely tuned to provide more detail and deeper insight into the sound, recreating the excitement of listening to an original musical performance.

With the innovative Metamaterial Absorption Technology (MAT), the R series reveals a new sense of music that is worth enjoying.

MAT Technology
The Metamaterial Absorption Technology - MAT absorbs 99% of unwanted sound from the rear of the driver, achieving a more natural and clearer sound.

Uni-Q Technology
KEF's most widely used technology provides uniform sound to everyone in front of a KEF speaker.

Special Microfiber Grilles
The R series performs equally well with or without grilles, featuring magnetic attachments that offer secure placement and a clean look.

Technical Specifications

  • Design: Two-way closed box
  • Drive units: Uni-Q Driver Array
  • HF: 25 mm (1 in) vented aluminum dome with MAT
  • MF/LF: 130 mm (5.25 in) aluminum cone
  • Crossover frequency: 2.6kHz
  • Frequency range (-6dB): 88Hz – 19.5kHz
  • Frequency response (±3dB): 97Hz – 17.5kHz
  • Harmonic distortion (90dB, 1m): less than 1% (220Hz and above)
  • Maximum output: 106 dB
  • Amplifier requirements: 25-150W
  • Nominal impedance: 4Ω (min 3.2Ω)
  • Sensitivity (2.83V/1m): 85 dB
  • Weight (per unit): 9.9 lbs (4.5 kg)
  • Dimensions with terminal (HxWxD per speaker): 6.9 × 6.9 × 10.2 in (174 × 175 × 259 mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Power
150 W

Power

Power is expressed in watts and describes the actual intensity that can be heard from the speaker. Your number indicates the maximum power that the speaker can handle for an extended period of time.
Freequency Range
88 - 19500 Hz

Freequency Range

The frequency response indicates the range of tones that a speaker can produce. The lower number indicates how low the speaker can play and how deep its bass goes. The higher number indicates the upper limit of the speaker's tonal range (high frequencies).
Nominal Impendance
4 ohm

Nominal Impendance

The Ohm resistance describes the amount of electrical resistance that an amplifier reads, that is, the amount of current that can "pass" through the speaker.
Sensitivity
85 dB

Sensitivity

The sensitivity of a speaker describes how effectively power (watt) is converted into sound pressure level (dB). Therefore, the higher the value, the louder the speakers will play with a given power.
Driver Configuration
2 No of Drivers

Driver Configuration

2

This is a 2-way speaker where frequencies are shared between the tweeter and woofer. That is, the sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Placing
Wall Mounted
Bass Driver
5.25 "
Dolby Atmos
Yes
Quantity
Pair
Colour
Brown
Height
17.4 cm
Width
17.5 cm
Length
25.9 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The R8 Meta can function as a rear speaker with its built-in wall mounting capability, or be placed on top of another speaker to produce Dolby Atmos sound by reflecting sound from the ceiling. It features a 12th generation Uni-Q® system with MAT technology for precise sound direction, resulting in genuine three-dimensional sound reproduction.

The R series is designed to be acoustically exceptional. Every element of the design has been finely tuned to provide more detail and deeper insight into the sound, recreating the excitement of listening to an original musical performance.

With the innovative Metamaterial Absorption Technology (MAT), the R series reveals a new sense of music that is worth enjoying.

MAT Technology
The Metamaterial Absorption Technology - MAT absorbs 99% of unwanted sound from the rear of the driver, achieving a more natural and clearer sound.

Uni-Q Technology
KEF's most widely used technology provides uniform sound to everyone in front of a KEF speaker.

Special Microfiber Grilles
The R series performs equally well with or without grilles, featuring magnetic attachments that offer secure placement and a clean look.

Technical Specifications

  • Design: Two-way closed box
  • Drive units: Uni-Q Driver Array
  • HF: 25 mm (1 in) vented aluminum dome with MAT
  • MF/LF: 130 mm (5.25 in) aluminum cone
  • Crossover frequency: 2.6kHz
  • Frequency range (-6dB): 88Hz – 19.5kHz
  • Frequency response (±3dB): 97Hz – 17.5kHz
  • Harmonic distortion (90dB, 1m): less than 1% (220Hz and above)
  • Maximum output: 106 dB
  • Amplifier requirements: 25-150W
  • Nominal impedance: 4Ω (min 3.2Ω)
  • Sensitivity (2.83V/1m): 85 dB
  • Weight (per unit): 9.9 lbs (4.5 kg)
  • Dimensions with terminal (HxWxD per speaker): 6.9 × 6.9 × 10.2 in (174 × 175 × 259 mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information
Power
150 W

Power

Power is expressed in watts and describes the actual intensity that can be heard from the speaker. Your number indicates the maximum power that the speaker can handle for an extended period of time.
Freequency Range
88 - 19500 Hz

Freequency Range

The frequency response indicates the range of tones that a speaker can produce. The lower number indicates how low the speaker can play and how deep its bass goes. The higher number indicates the upper limit of the speaker's tonal range (high frequencies).
Nominal Impendance
4 ohm

Nominal Impendance

The Ohm resistance describes the amount of electrical resistance that an amplifier reads, that is, the amount of current that can "pass" through the speaker.
Sensitivity
85 dB

Sensitivity

The sensitivity of a speaker describes how effectively power (watt) is converted into sound pressure level (dB). Therefore, the higher the value, the louder the speakers will play with a given power.
Driver Configuration
2 No of Drivers

Driver Configuration

2

This is a 2-way speaker where frequencies are shared between the tweeter and woofer. That is, the sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Placing
Wall Mounted
Bass Driver
5.25 "
Dolby Atmos
Yes
Quantity
Pair
Colour
Brown
Height
17.4 cm
Width
17.5 cm
Length
25.9 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.