Berling BETO-FLOOR concrete paint is a one-component, solvent-based alkyd-polyurethane paint for concrete floors, pavements, paved surfaces, plaster, brick and stone. It is suitable for indoor and outdoor use and offers resistance to moderate wear, changing weather conditions and the alkalinity of cement.
Apply with a brush or roller. On new surfaces, apply two coats directly after first removing mud, oil and other contaminants. On previously painted surfaces, remove old or flaking paint with sandpaper and apply one coat of Berling FIXATEUR solvent-based primer before the two coats of BETO-FLOOR; on a clean surface, apply the paint directly. Thin with White Spirit by up to 15% by volume, depending on the application method. Clean tools with White Spirit and dispose of any leftover product as hazardous waste.
- Colour: Grey
- Volume: 10 lt
- Type: Solvent-based alkyd-polyurethane
- Components: One-component
- Adhesion: Very good
- Coverage: High
- Resistance: To moderate wear, changing weather conditions and the alkalinity of cement
- Use: Indoor and outdoor
- Suitable surfaces: Concrete floors, pavements, paved surfaces, plaster, brick and stone
- Coverage rate: 9–11 m²/lt, depending on the absorbency of the surface
- Touch dry: 2–4 hours
- Recoat time: After 16 hours
- Thinning: With White Spirit by up to 15% by volume
- Density: 1.40–1.50 g/cm³, depending on the shade
- VOC: Up to 500 g/lt
- Directive: Compliant with 2004/42/EC
Manufacturer
OEMSpecifications
- Type
- Colour
- Colour
- Grey
- Acrilyc
- No
Quantity
- Volume
- 10 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.