Berling Swimming Pool Paint is a single-component, solvent-based protective paint suitable for concrete swimming pools, fountains, and non-potable water tanks, both indoors and outdoors. It resists water, moisture, mild acids, and other chemical solutions, but not strong acids. It can be applied without mixing using a brush or roller.
On new surfaces, apply one thinned coat as a primer followed by two topcoats; on previously painted surfaces, apply two coats. Before painting, test for moisture. Surfaces must be cleaned of dust and salts, and any loose old paint must be removed before repainting. Clean tools with Thinner E.
- Color: Light blue
- Volume: 700 ml
- Type: Single-component, solvent-based paint
- Suitable for: Concrete swimming pools, fountains, and non-potable water tanks
- Use: Indoors and outdoors
- Resistance: Water, moisture, mild acids, and other chemical solutions; not strong acids
- Coverage: 4–6 m²/lt, depending on surface absorbency
- Touch dry: ½–1 hour
- Recoat: After 16 hours
- Thinning: Thinner E, up to 15% by volume
- Density: 1.50 ± 0.03 g/cm³
- VOC: Up to 500 g/lt
- Application: Brush or roller
Specifications
- Type
- Pool Paint
- Colour
- Light Blue
- Acrilyc
- No
Quantity
- Volume
- 0.7 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.