Berling pool paint is a one-component solvent-based protective paint that requires no mixing. It is intended for concrete swimming pools, fountains and non-potable water tanks, both indoors and outdoors. It is resistant to water, moisture, weak acids and other chemical solutions, but not to strong acids.
Apply with a brush or roller. On new surfaces, apply one primer coat of the same paint, thinned with 12–15% Thinner E, followed by two top coats thinned with 0–10% Thinner E. On previously painted surfaces, apply two coats thinned with 0–10% Thinner E.
- Type: Pool paint
- Colour: White
- Volume: 3.5 L
- Base: Solvent-based
- Components: One-component
- Use: Concrete swimming pools, fountains and non-potable water tanks
- Application: Indoors and outdoors
- Resistance: Resistant to water, moisture, weak acids and other chemical solutions, but not strong acids
- Coverage: 4–6 m²/L, depending on the surface’s absorbency
- Touch dry: ½–1 hour
- Recoating: After 16 hours
- Thinning: With Thinner E, up to 15% by volume
- Density: 1.50 ± 0.03 g/cm³
- VOC: Up to 500 g/L (Directive 2004/42/EC, subcategory θ)
- Application tools: Brush or roller
- Tool cleaning: With Thinner E
Specifications
- Type
- Pool Paint
- Colour
- White
- Acrilyc
- No
Quantity
- Volume
- 3.5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.