Skroutz.mt

Pentax Electric Surface Water Pump 0.5hp
Surface Water Pumps

Pentax Electric Surface Water Pump 0.5hp Code: 113130002

The Pentax PM50 electric surface pump is peripheral, volumetric and positive displacement. It is suitable for small domestic systems and simple industrial applications, with suction through the front...

The Pentax PM50 electric surface pump is peripheral, volumetric and positive displacement. It is suitable for small domestic systems and simple industrial applications, with suction through the front port.

The pump body and motor base are made of cast iron, while the impeller is made of brass. It features an anti-locking system made of aluminium with...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Pentax PM50 electric surface pump is peripheral, volumetric and positive displacement. It is suitable for small domestic systems and simple industrial applications, with suction through the front port.

The pump body and motor base are made of cast iron, while the impeller is made of brass. It features an anti-locking system made of aluminium with stainless steel inserts and a cataphoresis coating. The motor is equipped with thermal protection.

  • Power supply: Electric
  • Horsepower: 0.5 hp
  • Installation: Horizontal
  • Head: up to 80 m
  • Operating pressure: up to 6 bar
  • Seal: Ceramic graphite NBR
  • Shaft: AISI 416 stainless steel
  • Liquid temperature: 0–90 °C
  • Motor: Two-pole induction
  • Voltage: 1 × 230 V
  • Frequency: 50 Hz
  • Current: 2.3 A
  • Ports: 1″ G × 1″ G
  • Insulation class: F
  • Protection rating: IPX4
  • Flow rate: 0–3 m³/h, 0–50 l/min

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
113130002

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Horsepower
0.5 hp
Manometric Head
80 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
6 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Pentax PM50 electric surface pump is peripheral, volumetric and positive displacement. It is suitable for small domestic systems and simple industrial applications, with suction through the front port.

The pump body and motor base are made of cast iron, while the impeller is made of brass. It features an anti-locking system made of aluminium with stainless steel inserts and a cataphoresis coating. The motor is equipped with thermal protection.

  • Power supply: Electric
  • Horsepower: 0.5 hp
  • Installation: Horizontal
  • Head: up to 80 m
  • Operating pressure: up to 6 bar
  • Seal: Ceramic graphite NBR
  • Shaft: AISI 416 stainless steel
  • Liquid temperature: 0–90 °C
  • Motor: Two-pole induction
  • Voltage: 1 × 230 V
  • Frequency: 50 Hz
  • Current: 2.3 A
  • Ports: 1″ G × 1″ G
  • Insulation class: F
  • Protection rating: IPX4
  • Flow rate: 0–3 m³/h, 0–50 l/min

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
113130002

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Horsepower
0.5 hp
Manometric Head
80 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
6 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

117,00 €
29,00 €   shipping cost