Novamix Planocolor cement mortar is intended for decorative finishes on interior and exterior walls and ceilings. It is applied with a trowel or plastering trowel and creates surfaces with different textures and a traditional appearance. It is breathable and suitable for damp areas, as well as exterior surfaces exposed to weather conditions.
It can be applied to concrete, cement mortars, renders, masonry mortars, cement boards and plasterboards when used with a suitable primer. Non-absorbent substrates require appropriate preparation and priming. The white powder can be tinted with PLANOCOLOR DESIGN A/V pigments. Two coats are required on new surfaces, with a maximum thickness of 2 mm per coat and a total thickness of up to 5 mm.
- Type: Pressed cement mortar
- Weight: 20 kg
- Consumption: 1.4 kg/m²/mm
- Mixing: 6–6.5 L of water per 20 kg
- Application: With a trowel or plastering trowel, in one or more coats
- Time between coats: 2–3 hours, depending on temperature and humidity
- Pot life: 3–4 hours
- Drying time: 2–3 hours to touch and 24 hours to dry fully, at 23°C
- Recoat time: 2–3 hours
- Tool cleaning: With water while the material is still wet; after hardening, mechanical cleaning only
- Protection: Protect from rain and frost for the first 24 hours
- Certification: CE EN 998-1, category CSIV, with Declaration of Performance (DoP)
- Emissions: Very low VOC emissions, EC-1 PLUS
- Compatibility: Meets LEED v4.1 Low-Emitting Materials requirements
- Type
- Cement mortar
- Weight
- 20 kg
- Pressed Cement Mortar
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.