Skroutz.mt

Leo Group Electric Surface Water Pump Centrifugal with Automatic Suction 2hp Single-Phase
Surface Water Pumps

Leo Group Electric Surface Water Pump Centrifugal with Automatic Suction 2hp Single-Phase Code: 01011

Type: LEPONO AJm 150

Power: 2.0 HP (1,490 watt)

Material: Cast iron body

Impeller: INOX

Maximum manometric head: 60 m

Maximum flow rate: 6.0 m³/h

Voltage: 230V

Outlet sizes: 1 1/4'' x 1''

Maximum...

Type: LEPONO AJm 150

Power: 2.0 HP (1,490 watt)

Material: Cast iron body

Impeller: INOX

Maximum manometric head: 60 m

Maximum flow rate: 6.0 m³/h

Voltage: 230V

Outlet sizes: 1 1/4'' x 1''

Maximum operating pressure: 8 bar

Temperature limits: -10 to +40°C

Maximum suction height from depth: up to 9 m

Centrifugal pump with the ability for automatic suction of...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
215 00 €
Delivery Wed, 23 Sep - Fri, 25 Sep
53,00 €   shipping cost
Sent from Greece
From Trusttools
Greece
See Water Pumps on the page of Trusttools

Learn more about invoicing
Review the product
Product report

Description

Description

Type: LEPONO AJm 150

Power: 2.0 HP (1,490 watt)

Material: Cast iron body

Impeller: INOX

Maximum manometric head: 60 m

Maximum flow rate: 6.0 m³/h

Voltage: 230V

Outlet sizes: 1 1/4'' x 1''

Maximum operating pressure: 8 bar

Temperature limits: -10 to +40°C

Maximum suction height from depth: up to 9 m

Centrifugal pump with the ability for automatic suction of water or other fluids with the same physical and chemical properties as water. Particularly suitable for household use, pressure units, for small agricultural applications, for irrigation, and for any other application that requires automatic suction.

  • Cast iron pump body with rust protection
  • Inox impeller
  • Inox shaft
  • Maximum water temperature: +35°C
  • Maximum suction depth: 9m

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
01011

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Flow Rate
6 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
60 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Type: LEPONO AJm 150

Power: 2.0 HP (1,490 watt)

Material: Cast iron body

Impeller: INOX

Maximum manometric head: 60 m

Maximum flow rate: 6.0 m³/h

Voltage: 230V

Outlet sizes: 1 1/4'' x 1''

Maximum operating pressure: 8 bar

Temperature limits: -10 to +40°C

Maximum suction height from depth: up to 9 m

Centrifugal pump with the ability for automatic suction of water or other fluids with the same physical and chemical properties as water. Particularly suitable for household use, pressure units, for small agricultural applications, for irrigation, and for any other application that requires automatic suction.

  • Cast iron pump body with rust protection
  • Inox impeller
  • Inox shaft
  • Maximum water temperature: +35°C
  • Maximum suction depth: 9m

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
01011

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Flow Rate
6 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
60 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

215,00 €
53,00 €   shipping cost