Set the delivery location to see products according to your choice.
It features a high-definition color LCD screen, stereo inputs/outputs, and a MIDI control input. The Loop Core Stereo allows you to create up to 6 hours of musical phrases, store them in one of the 99 available memory slots, and..
See full descriptionThe NUX Loop Core Stereo is the next-generation Looper pedal. It features a high-definition color LCD screen, stereo inputs/outputs, and MIDI control input.
Features:
Activate the Loop Core Stereo pedal, turn the VALUE knob to select an empty memory from 01 ~ 99, and then you can press the footswitch to record/playback/overdub your loops. You can also hold the footswitch in the UNDO/REDO/CLEAR position.
Turn the VALUE knob to select a memory location between 01~99 or adjust the parameters.
When working on loops or practicing, press the VALUE button once/twice to set the Loop/Drum volume.
Monophonic input, monophonic output.
This is the most common pedal loop setup for guitarists. Connect a guitar to the A/Mono input of the stereo Loop Core and connect the A/Mono output directly to a guitar amplifier. Finally, set the SOUND PATH as shown below.
Stereo input, stereo output.
Adjust the SOUND PATH as shown below.
OUT A for guitar, OUT B for drum machine.
To get the best sounds, you can connect the Loop Core Stereo to a guitar amplifier and a full-range frequency amplifier.
Set the SOUND PATH as shown below. This will separate the guitar signal and the drum signal into OUT A & OUT B individually.
Both OUT A & B to a mixer.
When playing at home or in the studio with a mixer and/or PA system, you can connect the Loop Core Stereo to separately control the mix of your guitar and drum machine. Additionally, this setup includes a frequency compensation mode to get a better signal from OUT A.
Set up the AUDIO PATH as shown below.
Almost every parameter of the Loop Core Stereo can be controlled by an external MIDI controller, such as tap tempo, stop/start/record, and many more. The MIDI to 1/8” cable is included to get you started quickly.
*Please download the user manual and check the MIDI commands.
The Loop Core Stereo allows users to customize their own boot-up image with a GIF.
– Connect the Loop Core Stereo to your computer and upload a GIF image to the folder: NUX LOOPER > NUX_LOOP > GIF .
– Disconnect and restart the Loop Core Stereo, then enter the DISPLAY setting and set the BOOT-UP PICTURE option to USER.
– Restart the Loop Core Stereo again. Enjoy your own custom GIF interface!
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.