Berling BETO-FLOOR floor paint is a one-component, solvent-based alkyd-polyurethane paint for concrete floors, pavements, cobblestones, plaster, bricks and stone. It can be used indoors and outdoors and withstands moderate wear, weather changes and the alkalinity of cement.
Apply with a brush or roller. On new surfaces, apply directly in two coats after removing mud, oil and other contaminants. On previously painted surfaces, remove any peeling paint and apply Berling FIXATEUR solvent-based primer before the two coats, unless the surface is clean. Thin with White Spirit by up to 15% by volume, depending on the application method. Clean tools with White Spirit.
- Type: One-component, solvent-based alkyd-polyurethane paint
- Colour: White
- Volume: 2.5 L
- Suitable surfaces: Concrete floors, pavements, cobblestones, plaster, bricks and stone
- Use: Interior and exterior
- Resistance: Moderate wear, weather changes and the alkalinity of cement
- Coverage: 9–11 m²/L, depending on surface absorbency
- Touch dry: 2–4 hours
- Recoating: After 16 hours
- Thinning: With White Spirit by up to 15% by volume
- Density: 1.40–1.50 g/cm³, depending on the shade
- VOC: Up to 500 g/L
- Directive: Compliant with 2004/42/EC
- Tool cleaning: With White Spirit
- Disposal of residues: As hazardous waste
Specifications
- Type
- Floor Painting
- Colour
- White
- Acrilyc
- No
Quantity
- Volume
- 2.5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.