Monto acrylic line marking paint is intended for marking pedestrian crossing lines, road markings, and control or warning areas. It is also used to mark electric vehicle charging spaces and parking spaces for people with disabilities. It is water-based and protects the surface, offering resistance to abrasion and weather conditions.
It dries in 10–30 minutes and can be recoated after 1–2 hours at 20 °C and 60% relative humidity. The surface can be washed after 25–30 days. Use water for application and cleaning tools. Temperature, humidity, and coat thickness may affect drying time.
- Type: Line marking paint
- Base: Acrylic
- Colour: Blue
- Finish: Satin
- Volume: 750 ml
- Specific gravity: 1.25 ± 0.05 kg/l
- Volume solids: 41 ± 1
- Weight solids: 55 ± 1
- Viscosity: 100 ± 10 KU
- Coverage: 6–9 m²/l
- Drying time: 10–30 minutes at 20 °C and 60% relative humidity
- Recoating time: 1–2 hours at 20 °C and 60% relative humidity
- Surface washing: After 25–30 days
- Thinner: Water
- Dilution for roller or brush: 0–15%
- Dilution for spray gun: 10–25%
- Dilution for airless spray gun: 0–10%
- VOC: 19.99 g/l (category i/BA 140/140, 2007/2010)
- Preparing new cementitious surfaces: Remove salts, excess moisture, efflorescence, and residue, and prepare the surface to ensure it is porous
- Maintaining old surfaces: Clean, disinfect, and repair defective areas; remove loose paint and, if necessary, sandblast to improve adhesion
- Road surface moisture: Up to 4%, measured at a depth of 2 cm
- First coat application: Dilute with approximately 15% water
- Second coat application: Dilute with 10–15% water
Specifications
- Type
- Road Marking Paint
- Colour
- Blue
- Acrilyc
- Yes
- Luminosity
- Satine
Quantity
- Volume
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.