Usage Instructions:

• To operate the device, you must use the appropriate power adapter.
• It is strictly forbidden to use the pump directly with untreated water without pre-filtration; otherwise, it will affect the result and lifespan.
• The pumps are not suitable for corrosive liquids, alcohols, acidic-alkaline liquids, etc.
• The wiring is not separated into positive and negative poles, and both wires can be connected as desired.
• When installing inside the water purifier, tighten the screws to avoid resonance noise and try to maintain enough space for the pump to dissipate heat.
• The pump should not run continuously for more than 4 hours. Stop for 30 minutes after running for more than 4 hours.
• The pump is not available for irrigation, solar energy, swimming, or water heater compression.

Technical Information:

• Model: wf-pu-24v
• Operating Voltage: 24v
• Input Pressure: 0 psi
• Operating Pressure: 80 psi
• Operating Current: ≤1.2A
• Operating Flow Rate: ≥55LPH
• Maximum Current: ≤2.8A
• Maximum Pressure: ≤80psi
• Size (Length * Width * Height): 186*100*102