Skroutz.mt

Makita DDF489RTJ Electric Drill Driver 620W
Power Drill Drivers & Screwdrivers

Makita DDF489RTJ Electric Drill Driver 620W

The Makita DDF489RTJ is an 18 V cordless drill driver with a compact two-speed gearbox and a brushless motor. It is used for drilling in wood and steel, as well as for screwdriving, with 21 torque...

The Makita DDF489RTJ is an 18 V cordless drill driver with a compact two-speed gearbox and a brushless motor. It is used for drilling in wood and steel, as well as for screwdriving, with 21 torque settings. XPT technology provides protection against dust and splashes, while the dual LED work light illuminates the work area.

It features electronic speed...

See full description See full description

Top specs

  • Power Supply Electric
  • Number of Batteries 2

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Battery Capacity

    The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Torque Setting

    The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).

  • Brushless

    The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

    1

    It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.
  • See all
386 92 €
Delivery Mon, 16 Nov - Fri, 20 Nov
14,00 €   shipping cost
Sent from Greece
From Flexin 4.5 (69)
4.5 (69 reviews)
Greece
20 pieces
See Power Tools on the page of Flexin

Learn more about invoicing
Review the product
Product report

Description

Description

The Makita DDF489RTJ is an 18 V cordless drill driver with a compact two-speed gearbox and a brushless motor. It is used for drilling in wood and steel, as well as for screwdriving, with 21 torque settings. XPT technology provides protection against dust and splashes, while the dual LED work light illuminates the work area.

It features electronic speed control, an electric brake, forward and reverse rotation, and deep discharge protection. The maximum output power is 620 W, and the dimensions are 174 × 81 × 261 mm. The sound pressure level is 77 dB(A), the vibration emission value is ≤ 2.5 m/s², and the vibration K value is 1.5 m/s².

  • Type: Drill driver
  • Power supply: Battery, LXT system
  • Voltage: 18 V
  • Batteries: 2 BL1850B LXT Li-ion batteries, each 5 Ah and 90 Wh, with charge level indicator
  • Charger: DC18RC rapid charger
  • Motor: Brushless
  • Maximum torque: 73 Nm
  • Speeds: 2
  • Maximum speed: 0–500 rpm in first gear and 0–1,800 rpm in second gear, no load
  • Torque settings: 21 settings
  • Chuck / Holder: 1.5–13 mm keyless chuck
  • Drilling capacity: Up to 13 mm in steel, 51 mm in wood with a Forstner bit, and 38 mm in wood with an auger bit
  • Work light: Dual LED
  • Weight: 2.5 kg with battery
  • Carrying case: Makpac size 2
  • Package contents: Drill driver, 2 batteries, charger, carrying case, belt hook, double PH/LS bit, and insert for the Makpac case

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Electric
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
2
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
5 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
5 Ah

Power Specifications

Power
620 W

Drilling Abilities

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.

Features & Functions

Maximum Motor Speed
1800 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
73 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
-

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
-
Maximum Chuck Diameter
-

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
2500 gr
Weight (with Battery)
2500 gr

Extra Features

Carrying Case
Case

Carrying Case

Case
It is delivered together with a carrying case or suitcase.
Handle Included
No
Integrated Light
Yes
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Makita DDF489RTJ is an 18 V cordless drill driver with a compact two-speed gearbox and a brushless motor. It is used for drilling in wood and steel, as well as for screwdriving, with 21 torque settings. XPT technology provides protection against dust and splashes, while the dual LED work light illuminates the work area.

It features electronic speed control, an electric brake, forward and reverse rotation, and deep discharge protection. The maximum output power is 620 W, and the dimensions are 174 × 81 × 261 mm. The sound pressure level is 77 dB(A), the vibration emission value is ≤ 2.5 m/s², and the vibration K value is 1.5 m/s².

  • Type: Drill driver
  • Power supply: Battery, LXT system
  • Voltage: 18 V
  • Batteries: 2 BL1850B LXT Li-ion batteries, each 5 Ah and 90 Wh, with charge level indicator
  • Charger: DC18RC rapid charger
  • Motor: Brushless
  • Maximum torque: 73 Nm
  • Speeds: 2
  • Maximum speed: 0–500 rpm in first gear and 0–1,800 rpm in second gear, no load
  • Torque settings: 21 settings
  • Chuck / Holder: 1.5–13 mm keyless chuck
  • Drilling capacity: Up to 13 mm in steel, 51 mm in wood with a Forstner bit, and 38 mm in wood with an auger bit
  • Work light: Dual LED
  • Weight: 2.5 kg with battery
  • Carrying case: Makpac size 2
  • Package contents: Drill driver, 2 batteries, charger, carrying case, belt hook, double PH/LS bit, and insert for the Makpac case

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Electric
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
2
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
5 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
5 Ah

Power Specifications

Power
620 W

Drilling Abilities

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.

Features & Functions

Maximum Motor Speed
1800 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
73 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
-

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
-
Maximum Chuck Diameter
-

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
2500 gr
Weight (with Battery)
2500 gr

Extra Features

Carrying Case
Case

Carrying Case

Case
It is delivered together with a carrying case or suitcase.
Handle Included
No
Integrated Light
Yes
With Charger
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

386,92 €
14,00 €   shipping cost