To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, mold residues, or moisture.

For new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water).

Apply the product in 2 coats (after thoroughly mixing it) which should be spaced 1 - 2 hours apart. The product achieves all its mechanical strengths after 20 - 30 days.

Dilution:

• First coat: 15% water.
• Second coat: 5-10% water.

Application conditions:

Avoid applying the product at temperatures below 6°C and above 40°C, and when relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the paint.

Application tools:

• Brush
• Roller
• Spray gun

During work, keep the tools “wet” inside the container or in the product. Wipe off the tools well back into the box and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of cleaning liquids in the groundwater.