Skroutz.mt

Premier Trophy Motorcycle Helmet Full Face ECE 22.06
Motorcycle Helmets

Premier Trophy Motorcycle Helmet Full Face ECE 22.06 Code: APINTTRYCARNXG00

The construction of the outer shell is molded with a multi-axial DCA structure consisting of carbon and aramid fibers mixed with epoxy resin.

The construction of the inner shell has differentiated EPS...

The construction of the outer shell is molded with a multi-axial DCA structure consisting of carbon and aramid fibers mixed with epoxy resin.

The construction of the inner shell has differentiated EPS density for better absorption of the energy generated by impact. The combination of internal and external shell construction results in a lightweight, durable,...

See full description See full description

  • Type

    Full Face

    The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.

  • Material

    Carbon

    This is a high-tech material used in top-performance helmets.

    Carbon Fiber offers exceptional impact resistance, extremely low weight, and high torsional rigidity, making it ideal for racing use.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

Size

International
Review the product
Product report

Description

Description

The construction of the outer shell is molded with a multi-axial DCA structure consisting of carbon and aramid fibers mixed with epoxy resin.

The construction of the inner shell has differentiated EPS density for better absorption of the energy generated by impact. The combination of internal and external shell construction results in a lightweight, durable, and comfortable helmet.

The anti-scratch visor is adjusted to the shell with a mechanism that regulates its movement. Internal linings made of hypoallergenic fabric treated with disinfection and finished with synthetic leather.

The strap has a double ring buckle. The Platinum Edition comes with colored stitching that matches the graphic designs, leather elements, and special branded on fire Premier logos.

  • Removable pads
  • Removable lining
  • Shell material: Carbon fiber, Dyneema, Aramid fibers
  • ECE 22.06

SIZES (in cm):

  • XS 53-54
  • S 55-56
  • M 57
  • L 58
  • XL 59

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
APINTTRYCARNXG00

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Material
Carbon

Material

Carbon

This is a high-tech material used in top-performance helmets.

Carbon Fiber offers exceptional impact resistance, extremely low weight, and high torsional rigidity, making it ideal for racing use.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The construction of the outer shell is molded with a multi-axial DCA structure consisting of carbon and aramid fibers mixed with epoxy resin.

The construction of the inner shell has differentiated EPS density for better absorption of the energy generated by impact. The combination of internal and external shell construction results in a lightweight, durable, and comfortable helmet.

The anti-scratch visor is adjusted to the shell with a mechanism that regulates its movement. Internal linings made of hypoallergenic fabric treated with disinfection and finished with synthetic leather.

The strap has a double ring buckle. The Platinum Edition comes with colored stitching that matches the graphic designs, leather elements, and special branded on fire Premier logos.

  • Removable pads
  • Removable lining
  • Shell material: Carbon fiber, Dyneema, Aramid fibers
  • ECE 22.06

SIZES (in cm):

  • XS 53-54
  • S 55-56
  • M 57
  • L 58
  • XL 59

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
APINTTRYCARNXG00

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Material
Carbon

Material

Carbon

This is a high-tech material used in top-performance helmets.

Carbon Fiber offers exceptional impact resistance, extremely low weight, and high torsional rigidity, making it ideal for racing use.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

426,99 €
17,00 €   shipping cost