Berling Anti Graffiti surface varnish forms a clear, glossy film that protects against graffiti without changing the substrate’s colour. It is a two-component, water-based polyurethane varnish, suitable for wood, plaster, exposed concrete and walls painted with emulsion or acrylic paints.
Graffiti can be removed with pressurised water or, if necessary, with a special thinner, while board-marker writing can be cleaned with a slightly damp cloth. The film retains its durability after repeated cleaning and is resistant to weather conditions and UV radiation, as well as yellowing. It offers chemical resistance and adhesion, and has been tested with most commercially available spray paints.
- Surface material: Wood
- Type: Surface varnish
- Base: Water-based polyurethane
- Components: 2
- Colour: Clear
- Gloss level: Glossy, above 85 units at 60°
- Protection: Against graffiti, weather conditions and UV radiation
- Graffiti removal: With pressurised water or Berling NC1 thinner
- Board-marker removal: With a slightly damp cloth
- Coverage: 10–12 m²/lt
- Touch dry: 1–1.5 hours
- Through-dry: At least 24 hours
- Recoating: After 2 hours and within 24 hours
- First coat dilution: With water, up to 15%
- Final coats dilution: With water, up to 6%
- Coats: 3 for full coverage
- Mixing ratio: 3 parts A to 1 part B by volume
- Pot life: 2.5 hours at 25 °C
- Application temperature: 12–30 °C
- Application relative humidity: Up to 75%
- Application: With a roller or brush, on a dry surface
- Time to full curing: 7 days
- VOC content: Up to 70 g/lt
- Product Number
- 111074.375+111074.125
- Type
- Surface Varnish
- Surface Material
- of Wood
- Glossiness
- Gloss
- Insecticide / Antifungal
- No
- Diluting Agent
- -
- Polyurethane
- No
- 2-Component
- No
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.