Skroutz.mt

O'Neal 2srs Rancid V.24 Motorcycle Helmet Motocross ECE 22.06 1450gr
Motorcycle Helmets

O'Neal 2srs Rancid V.24 Motorcycle Helmet Motocross ECE 22.06 1450gr Code: ONL000KRA60

MX Motorcycle Helmet

  • ABS shell
  • Optimized air circulation through internal ventilation channels
  • Comfortable lining, removable, absorbent, and easily washable
  • Double D ring safety buckle
  • Non-slip mask...

MX Motorcycle Helmet

  • ABS shell
  • Optimized air circulation through internal ventilation channels
  • Comfortable lining, removable, absorbent, and easily washable
  • Double D ring safety buckle
  • Non-slip mask strap guidance thanks to the preformed shell design
  • Compatible with Airflaps
  • Meets the new ECE 22.06 standard for increased safety
See full description See full description

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

O'Neal size guide
O'Neal size guide

Size

O'Neal size guide
International
Product report

Description

Description

MX Motorcycle Helmet

  • ABS shell
  • Optimized air circulation through internal ventilation channels
  • Comfortable lining, removable, absorbent, and easily washable
  • Double D ring safety buckle
  • Non-slip mask strap guidance thanks to the preformed shell design
  • Compatible with Airflaps
  • Meets the new ECE 22.06 standard for increased safety

ABS Shell and Top Safety

The O'NEAL 2SRS RANCID helmet is made from an exceptionally sturdy yet lightweight ABS shell, offering the necessary impact resistance without straining the neck. It fully complies with the ECE 22.06 safety standard, ensuring that every rider enjoys professional-level protection. Weighing approximately 1450 grams and featuring an aerodynamic design, it is a reliable choice for Motocross and Enduro, combining durability with O'NEAL's advanced manufacturing technology.

Optimal Ventilation and Cooling

Maintaining the right temperature is crucial during intense riding, which is why the 2SRS features multiple strategically placed air vents. These vents ensure continuous airflow, allowing you to keep a "cool head" even in the most demanding conditions or during long training sessions. The advanced design allows air to circulate freely inside, removing heat and moisture, offering a feeling of freshness from the beginning to the end of your ride.

Ultra-Plush Inner Lining

Comfort meets hygiene with the Ultra-Plush inner lining by O'NEAL. The material is specially designed to absorb sweat, keeping your face dry during action. The most important advantage is that the lining is fully removable and washable, allowing you to keep your helmet clean and fresh after every use. The soft feel of the fabric embraces your face without causing irritation, offering a premium sensation every time you wear it.

Double-D Closure System and Perfect Fit

For maximum safety and stability, the helmet is equipped with the classic Double-D Safety Lock closure system. This mechanism allows for easy and precise adjustment of the strap, ensuring that the helmet will stay in place even during the most violent movements. The perfect fit is complemented by the ergonomic design that prevents unwanted shifting, giving you the confidence you need to focus solely on your riding performance and the challenges of the track.

Compatibility with Airflaps and Goggles Guide

The O'NEAL 2SRS is designed with athletes' needs in mind, offering a special configuration for the secure guidance of the goggle strap at the back. In addition, it is fully compatible with the Airflaps system, which allows for extra ventilation under the goggles and helmet without the need to remove them. These technical features make the helmet extremely versatile, allowing the rider to adjust their equipment according to weather conditions and personal preferences.

Matte Finish and Durable Graphics

The appearance of the RANCID impresses with its modern matte finish, which highlights the vibrant colors and aggressive design. The colorful graphics are not only aesthetically perfect, but also extremely durable over time thanks to the cutting-edge printing technology used by O'NEAL. This means that your helmet will maintain its "factory" look despite dust, mud, and exposure to the sun, making you stand out on the track with a timeless sporty style.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
ONL000KRA60

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1450 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (3)

Reviews

5.0
3
5.0
Review this product
  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

MX Motorcycle Helmet

  • ABS shell
  • Optimized air circulation through internal ventilation channels
  • Comfortable lining, removable, absorbent, and easily washable
  • Double D ring safety buckle
  • Non-slip mask strap guidance thanks to the preformed shell design
  • Compatible with Airflaps
  • Meets the new ECE 22.06 standard for increased safety

ABS Shell and Top Safety

The O'NEAL 2SRS RANCID helmet is made from an exceptionally sturdy yet lightweight ABS shell, offering the necessary impact resistance without straining the neck. It fully complies with the ECE 22.06 safety standard, ensuring that every rider enjoys professional-level protection. Weighing approximately 1450 grams and featuring an aerodynamic design, it is a reliable choice for Motocross and Enduro, combining durability with O'NEAL's advanced manufacturing technology.

Optimal Ventilation and Cooling

Maintaining the right temperature is crucial during intense riding, which is why the 2SRS features multiple strategically placed air vents. These vents ensure continuous airflow, allowing you to keep a "cool head" even in the most demanding conditions or during long training sessions. The advanced design allows air to circulate freely inside, removing heat and moisture, offering a feeling of freshness from the beginning to the end of your ride.

Ultra-Plush Inner Lining

Comfort meets hygiene with the Ultra-Plush inner lining by O'NEAL. The material is specially designed to absorb sweat, keeping your face dry during action. The most important advantage is that the lining is fully removable and washable, allowing you to keep your helmet clean and fresh after every use. The soft feel of the fabric embraces your face without causing irritation, offering a premium sensation every time you wear it.

Double-D Closure System and Perfect Fit

For maximum safety and stability, the helmet is equipped with the classic Double-D Safety Lock closure system. This mechanism allows for easy and precise adjustment of the strap, ensuring that the helmet will stay in place even during the most violent movements. The perfect fit is complemented by the ergonomic design that prevents unwanted shifting, giving you the confidence you need to focus solely on your riding performance and the challenges of the track.

Compatibility with Airflaps and Goggles Guide

The O'NEAL 2SRS is designed with athletes' needs in mind, offering a special configuration for the secure guidance of the goggle strap at the back. In addition, it is fully compatible with the Airflaps system, which allows for extra ventilation under the goggles and helmet without the need to remove them. These technical features make the helmet extremely versatile, allowing the rider to adjust their equipment according to weather conditions and personal preferences.

Matte Finish and Durable Graphics

The appearance of the RANCID impresses with its modern matte finish, which highlights the vibrant colors and aggressive design. The colorful graphics are not only aesthetically perfect, but also extremely durable over time thanks to the cutting-edge printing technology used by O'NEAL. This means that your helmet will maintain its "factory" look despite dust, mud, and exposure to the sun, making you stand out on the track with a timeless sporty style.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
ONL000KRA60

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1450 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (3)

5.0
3
5.0
Review this product
  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
125,00 €
29,00 €   shipping cost