Soudal 64A wood glue is a PVA dispersion-based adhesive for interior use. It dries naturally and leaves a translucent finish. The bonded components can be further processed after approximately 2 hours. The bond has a D2 water resistance rating in accordance with DIN EN 204 and can withstand brief contact with running or condensed water.
Apply to one surface using a brush or fine-toothed spreader. Surfaces must be clean, dry and degreased. After joining, clamp the components for at least 20 minutes. Remove fresh adhesive stains with water; hardened adhesive must be removed mechanically.
- Type: Wood glue
- Base: PVA dispersion
- Colour: White
- Finish after drying: Translucent
- Use: Interior
- Water resistance: D2 in accordance with DIN EN 204
- Drying time: Approximately 20 minutes
- Open time: Approximately 5 minutes
- Pressing time: Approximately 1–2 hours at room temperature
- Clamping pressure: 1–2 kg/cm²
- Time before further processing: Approximately 2 hours
- Viscosity (Brookfield RVT 5/20): 13,000–19,000 mPa.s
- Density (DIN 53479): 1.1 g/cm³
- Solids content: 59–61%
- pH: 3.5–5.5
- Minimum film-forming temperature: 6 °C
- Consumption for surface bonding: Approximately 80–120 g/m²
- Consumption for assembly: Approximately 150–180 g/m²
- Heat resistance after drying: −20 °C to +70 °C
- Application temperature: +5 °C to +30 °C
- Storage: 24 months in sealed original packaging, at +5 °C to +25 °C
- Storage protection: Protect from frost
- Pieces: 1
Dimensions
- Type
- Wood Glue
- Epoxy
- No
- 2-Component
- No
- High Temperature
- No
- Colour
- White
- Pieces
- 1 pcs
Capacity
- Weight
- 0.25 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.