Skroutz.mt

Grandstream GWN7662 WiFi Mesh Network Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)
Access Points

Grandstream GWN7662 WiFi Mesh Network Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)

The Grandstream GWN7662 access point provides indoor Wi‑Fi 6 connectivity on the 2.4 GHz and 5 GHz bands. It supports Wi‑Fi Mesh, 2x2 MIMO technology, and PoE+ power.

  • Type: Access point
  • Placement:...

The Grandstream GWN7662 access point provides indoor Wi‑Fi 6 connectivity on the 2.4 GHz and 5 GHz bands. It supports Wi‑Fi Mesh, 2x2 MIMO technology, and PoE+ power.

  • Type: Access point
  • Placement: Indoor
  • Wi‑Fi generation: Wi‑Fi 6
  • Frequency: Dual band (2.4 GHz and 5 GHz)
  • Networking standards: 802.11a, 802.11b/g/n, 802.11ac, 802.11ax
  • Wi‑Fi Mesh: Supported
  • ...
See full description See full description

Top specs

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 6

    The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

    Ideal for homes with many smart devices.

    Compatible with all previous generations.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Grandstream GWN7662 access point provides indoor Wi‑Fi 6 connectivity on the 2.4 GHz and 5 GHz bands. It supports Wi‑Fi Mesh, 2x2 MIMO technology, and PoE+ power.

  • Type: Access point
  • Placement: Indoor
  • Wi‑Fi generation: Wi‑Fi 6
  • Frequency: Dual band (2.4 GHz and 5 GHz)
  • Networking standards: 802.11a, 802.11b/g/n, 802.11ac, 802.11ax
  • Wi‑Fi Mesh: Supported
  • MIMO technology: 2x2
  • Ethernet LAN (RJ-45) ports: 2
  • LAN speed: 1000 Mbps, 2500 Mbps
  • PoE support: PoE+
  • SSID: 32
  • Antennas: 6 external
  • Maximum antenna gain: 5.26 dBi
  • QoS: Supported
  • VLAN: Supported
  • Security standards: WEP, WPA, WPA2, WPA2-PSK, WPA3
  • Maximum power consumption: 9 W
  • Operating temperature: -10–45 °C
  • Storage temperature: -30–60 °C
  • Operating relative humidity: 5–95%
  • Certifications: FCC, CE, RCM, IC
  • Weight: 540 g
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE+
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Grandstream GWN7662 access point provides indoor Wi‑Fi 6 connectivity on the 2.4 GHz and 5 GHz bands. It supports Wi‑Fi Mesh, 2x2 MIMO technology, and PoE+ power.

  • Type: Access point
  • Placement: Indoor
  • Wi‑Fi generation: Wi‑Fi 6
  • Frequency: Dual band (2.4 GHz and 5 GHz)
  • Networking standards: 802.11a, 802.11b/g/n, 802.11ac, 802.11ax
  • Wi‑Fi Mesh: Supported
  • MIMO technology: 2x2
  • Ethernet LAN (RJ-45) ports: 2
  • LAN speed: 1000 Mbps, 2500 Mbps
  • PoE support: PoE+
  • SSID: 32
  • Antennas: 6 external
  • Maximum antenna gain: 5.26 dBi
  • QoS: Supported
  • VLAN: Supported
  • Security standards: WEP, WPA, WPA2, WPA2-PSK, WPA3
  • Maximum power consumption: 9 W
  • Operating temperature: -10–45 °C
  • Storage temperature: -30–60 °C
  • Operating relative humidity: 5–95%
  • Certifications: FCC, CE, RCM, IC
  • Weight: 540 g
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE+
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

126,31 €
14,00 €   shipping cost