The Next Systems motor kit automates sliding garage doors with a leaf weight of up to 600 kg. The electromechanical motor uses permanently lubricated grease, has internal metal gears and mechanical limit switches with microswitches and a spring. The manual release is operated with a key, allowing the door to be moved by hand.

The kit includes a motor, an electronic control unit with an integrated receiver, a 4-button remote control and a 3 m length of module 4 metal rack, with spacers and screws. The maximum door leaf speed is 13 m/min. For a door approximately 5 m long at a temperature of 20°C, it supports up to 25 opening and closing cycles per hour.

• Type: Motor for sliding garage door
• Maximum door leaf weight: 600 kg
• Motor power: 280 W
• Supply voltage: 230 VAC
• Motor operating voltage: 230 VAC
• Supply current: 1.3 A
• Motor speed: 1400 rpm
• Capacitor capacity: 12.5 μF
• Mechanism type: Electromechanical, non-reversible, permanently lubricated with grease
• Internal gears: Metal
• Operating frequency: S3: 30% at 20°C, S2: 10 min
• Opening and closing cycles per hour: Up to 25 for a door approximately 5 m long at 20°C
• Maximum door leaf speed: 13 m/min
• Winding thermal protection: 120°C
• Gear type: Z17 / m4 (17 teeth / module 4)
• Limit switches: Mechanical, with microswitches and a spring
• Manual release: Key-operated
• Operating temperature: From -20°C to +55°C
• Protection rating: IP-44
• Motor weight: 10 kg
• Motor dimensions: 237 × 213 × 270 mm, including the gear and excluding the mounting base
• Motor cover colour: Black
• Control unit: 1 piece, with integrated receiver
• Remote control: 1 piece, with 4 buttons
• Rack: Metal, 3 m long, module 4, with spacers and screws
• Package contents: 1 motor, 2 release keys, 1 metal mounting base, 4 M8 galvanized anchors, 8 Ø8 galvanized washers, 8 M8 nuts, 2 metal stop plates, 4 M6 screws for the plates, 4 Ø8 mm spring washers for the plates, 1 12.5 μF capacitor, 1 user manual, 1 electronic control unit with integrated receiver, 1 4-button remote control, 3 m metal rack with spacers and screws