Garage Door Motor Set

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg

The Next Systems motor kit automates sliding driveway and garage gates weighing up to 600 kg. The electromechanical mechanism is permanently lubricated with grease and is non-reversible, while the...

The Next Systems motor kit automates sliding driveway and garage gates weighing up to 600 kg. The electromechanical mechanism is permanently lubricated with grease and is non-reversible, while the release mechanism uses a key for manual operation. The gate leaf speed reaches 13 m/min, and the kit includes an electronic control panel with an integrated...

See full description See full description
240 00 €
Delivery by Thu, 12 Nov
38,00 €   shipping cost
Sent from Greece
From NextSystems
Greece
20+ pieces
See Garage Door Mechanisms on the page of NextSystems

Learn more about invoicing

Description

Description

The Next Systems motor kit automates sliding driveway and garage gates weighing up to 600 kg. The electromechanical mechanism is permanently lubricated with grease and is non-reversible, while the release mechanism uses a key for manual operation. The gate leaf speed reaches 13 m/min, and the kit includes an electronic control panel with an integrated receiver and a 4-button remote control.

The motor operates at 230 VAC and has a power rating of 280 W, metal internal gears, and mechanical limit switches with microswitches and a spring. The rack is metal, 3 m long, and supplied with spacers and screws.

  • Type: Sliding garage door
  • Maximum gate leaf weight: 600 kg
  • Motor power: 280 W
  • Motor operating voltage: 230 VAC
  • Supply current: 1.3 A
  • Motor speed: 1400 rpm
  • Capacitor capacity: 12.5 μF
  • Opening and closing cycles per hour: Up to 25 for a gate of approximately 5 m in length at 20 °C
  • Maximum duty cycle: S3: 30% at 20 °C, S2: 10 min
  • Gate leaf speed: Up to 13 m/min
  • Motor winding thermal protection: 120 °C
  • Internal gears: Metal
  • Gear type: Z17 / m4 (17 teeth / module 4)
  • Limit switches: Mechanical, with microswitches and a spring
  • Release mechanism: Key-operated
  • Operating temperature: From -20 °C to +55 °C
  • Protection rating: IP-44
  • Motor weight: 10 kg
  • Motor dimensions: 237 × 213 × 270 mm, excluding the mounting base
  • Motor cover color: Black
  • Control panel: 1 electronic panel with integrated receiver
  • Remote control: 1 unit, 4 buttons
  • Rack: Metal, 3 m, module 4, with spacers and screws
  • Motor: 1 DKC600 motor
  • Accessories: 2 release keys, 1 metal mounting base, 4 galvanized M8 anchor bolts, 8 galvanized Ø8 washers, 8 M8 nuts, 2 metal stop plates, 4 M6 screws, and 4 Ø8 mm spring washers for the plates
  • Capacitor capacity: 12.5 μF
  • Package contents: 1 user manual

Manufacturer

See full description

Specifications

Specifications

Specifications

Motor type
Sliding
Maximum Weight
600 kg
Built-in Control Panel
No
Wi-Fi
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
1 pcs
Security Beacon
1 pcs
Gear Rack
3 m

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Next Systems motor kit automates sliding driveway and garage gates weighing up to 600 kg. The electromechanical mechanism is permanently lubricated with grease and is non-reversible, while the release mechanism uses a key for manual operation. The gate leaf speed reaches 13 m/min, and the kit includes an electronic control panel with an integrated receiver and a 4-button remote control.

The motor operates at 230 VAC and has a power rating of 280 W, metal internal gears, and mechanical limit switches with microswitches and a spring. The rack is metal, 3 m long, and supplied with spacers and screws.

  • Type: Sliding garage door
  • Maximum gate leaf weight: 600 kg
  • Motor power: 280 W
  • Motor operating voltage: 230 VAC
  • Supply current: 1.3 A
  • Motor speed: 1400 rpm
  • Capacitor capacity: 12.5 μF
  • Opening and closing cycles per hour: Up to 25 for a gate of approximately 5 m in length at 20 °C
  • Maximum duty cycle: S3: 30% at 20 °C, S2: 10 min
  • Gate leaf speed: Up to 13 m/min
  • Motor winding thermal protection: 120 °C
  • Internal gears: Metal
  • Gear type: Z17 / m4 (17 teeth / module 4)
  • Limit switches: Mechanical, with microswitches and a spring
  • Release mechanism: Key-operated
  • Operating temperature: From -20 °C to +55 °C
  • Protection rating: IP-44
  • Motor weight: 10 kg
  • Motor dimensions: 237 × 213 × 270 mm, excluding the mounting base
  • Motor cover color: Black
  • Control panel: 1 electronic panel with integrated receiver
  • Remote control: 1 unit, 4 buttons
  • Rack: Metal, 3 m, module 4, with spacers and screws
  • Motor: 1 DKC600 motor
  • Accessories: 2 release keys, 1 metal mounting base, 4 galvanized M8 anchor bolts, 8 galvanized Ø8 washers, 8 M8 nuts, 2 metal stop plates, 4 M6 screws, and 4 Ø8 mm spring washers for the plates
  • Capacitor capacity: 12.5 μF
  • Package contents: 1 user manual

Manufacturer

Specifications

Motor type
Sliding
Maximum Weight
600 kg
Built-in Control Panel
No
Wi-Fi
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
1 pcs
Security Beacon
1 pcs
Gear Rack
3 m

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

240,00 €
38,00 €   shipping cost