Skroutz.mt

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg
Garage Door Motor Set

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg

Mechanism for automating sliding gates and garage doors up to 600kg.

Technical Specifications

  • Product code: DKC600-ec4-e500-SL-ECO-KIT
  • Maximum door leaf weight: 600kg
  • Motor power: 280Watt
  • Mechanism...

Mechanism for automating sliding gates and garage doors up to 600kg.

Technical Specifications

  • Product code: DKC600-ec4-e500-SL-ECO-KIT
  • Maximum door leaf weight: 600kg
  • Motor power: 280Watt
  • Mechanism type: Electromechanical with permanent lubrication using grease, non-reversible
  • Openings per hour: up to 25 for a 5 m door at 20°C
  • Motor operating voltage:...
See full description See full description
Review the product
Product report

Description

Description

Mechanism for automating sliding gates and garage doors up to 600kg.

Technical Specifications

  • Product code: DKC600-ec4-e500-SL-ECO-KIT
  • Maximum door leaf weight: 600kg
  • Motor power: 280Watt
  • Mechanism type: Electromechanical with permanent lubrication using grease, non-reversible
  • Openings per hour: up to 25 for a 5 m door at 20°C
  • Motor operating voltage: 230VAC (single phase)
  • Motor RPM: 1400rpm
  • Input current: 1.3A
  • Capacitor capacity: 12.5 μF
  • Thermal protection of motor winding: 120°C
  • Operating temperature range: -20°C to +55°C
  • Ingress protection rating for dust and moisture: IP-44
  • Motor weight: 10Kg
  • Motor dimensions: 237mm x 213mm x 270mm
  • Motor box dimensions: 270mm x 255mm x 320mm
  • Motor cover color: Black

Contents of the original set

  • 1 DKC600 motor
  • 2 release keys (for manual operation)
  • 1 metal support bracket
  • 4 galvanized M8 anchors
  • 8 galvanized Ø8 washers
  • 8 M8 nuts
  • 2 metal plates (stop plates) for activating the limit switches
  • 4 M6 screws for the stop plates
  • 1 capacitor 12.5 μF
  • 1 user manual
  • 1 electronic control board with built-in receiver
  • 1 remote control with 4 buttons
  • 3 meters of metal rack module 4 (toothed ruler) with spacers and screws

The ECO KIT has been designed with an emphasis on price, offering an economical solution with the minimal accessories required for the operation of the mechanism.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
1 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Gear Rack
3 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Mechanism for automating sliding gates and garage doors up to 600kg.

Technical Specifications

  • Product code: DKC600-ec4-e500-SL-ECO-KIT
  • Maximum door leaf weight: 600kg
  • Motor power: 280Watt
  • Mechanism type: Electromechanical with permanent lubrication using grease, non-reversible
  • Openings per hour: up to 25 for a 5 m door at 20°C
  • Motor operating voltage: 230VAC (single phase)
  • Motor RPM: 1400rpm
  • Input current: 1.3A
  • Capacitor capacity: 12.5 μF
  • Thermal protection of motor winding: 120°C
  • Operating temperature range: -20°C to +55°C
  • Ingress protection rating for dust and moisture: IP-44
  • Motor weight: 10Kg
  • Motor dimensions: 237mm x 213mm x 270mm
  • Motor box dimensions: 270mm x 255mm x 320mm
  • Motor cover color: Black

Contents of the original set

  • 1 DKC600 motor
  • 2 release keys (for manual operation)
  • 1 metal support bracket
  • 4 galvanized M8 anchors
  • 8 galvanized Ø8 washers
  • 8 M8 nuts
  • 2 metal plates (stop plates) for activating the limit switches
  • 4 M6 screws for the stop plates
  • 1 capacitor 12.5 μF
  • 1 user manual
  • 1 electronic control board with built-in receiver
  • 1 remote control with 4 buttons
  • 3 meters of metal rack module 4 (toothed ruler) with spacers and screws

The ECO KIT has been designed with an emphasis on price, offering an economical solution with the minimal accessories required for the operation of the mechanism.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
1 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Gear Rack
3 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

240,00 €
38,00 €   shipping cost