Skroutz.mt

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg
Garage Door Motor Set

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg

Mechanism for automating sliding gates and garage doors up to 600kg.

Product Code (SKU): DKC600-WIZ-SET-2-RED
Maximum door leaf weight: 600kg
Motor power: 280Watt
Mechanism type: Permanent lubrication...

Mechanism for automating sliding gates and garage doors up to 600kg.

Product Code (SKU): DKC600-WIZ-SET-2-RED
Maximum door leaf weight: 600kg
Motor power: 280Watt
Mechanism type: Permanent lubrication with grease, Non-reversible
Open/close cycles per hour: for a door of indicative length 5 m, at 20°C: up to 25
Operating voltage of motor: 230VAC...
See full description See full description
Review the product
Product report

Description

Description

Mechanism for automating sliding gates and garage doors up to 600kg.

Product Code (SKU): DKC600-WIZ-SET-2-RED
Maximum door leaf weight: 600kg
Motor power: 280Watt
Mechanism type: Permanent lubrication with grease, Non-reversible
Open/close cycles per hour: for a door of indicative length 5 m, at 20°C: up to 25
Operating voltage of motor: 230VAC (single-phase)

What is included in the initial set:

  • 1 DKC600 motor
  • 2 release keys (for manual operation)
  • 1 metal support base
  • 4 M8 galvanized anchors
  • 8 Ø8 galvanized washers
  • 8 M8 nuts
  • 2 metal sheets (stop plates) for activating the limit switches
  • 4 M6 screws for the stop plates
  • 4 Ø8mm grover washers for the stop plates
  • 1 capacitor 12.5 μF
  • 1 user manual
  • 1 electronic control panel with built-in receiver
  • 2 remote controls with 4 buttons
  • 1 set of safety photocells (wired: transmitter & receiver)
  • 1 operation notification light

In a separate package with dimensions 1210mm x 60mm x 30mm, 4 meters of metal rack module 4 (toothed rail) with spacers and screws are included.

Technical Specifications:

  • Power supply voltage: 230VAC
  • Motor power consumption: 280Watt
  • Input current: 1.3A
  • Motor speed: 1400rpm
  • Capacitance: 12.5 μF
  • Maximum door weight: 600kg
  • Mechanism type: Electromechanical permanent lubrication with grease, non-reversible
  • Internal gears: Metal
  • Maximum usage frequency: S3: 30% at 20°C S2: 10min
  • Maximum leaf speed: 13m/min
  • Motor winding thermal protection: 120°C
  • Gear type: Z17 / m4 (17 teeth / module 4)
  • Type of limit switches: Mechanical - with microswitches and spring
  • Decoupling method: With key (door that unlocks with a key)
  • Operating temperature range: -20°C to +55°C
  • Degree of protection against dust and moisture: IP-44
  • Sound pressure level: <56dB
  • Motor weight: 10Kg
  • Motor dimensions: 237mm x 213 mm x 270 mm (Length x Width x Height - including the gear but excluding the support base)
  • Motor box dimensions: 270mm x 255mm x 320mm (Length x Width x Height)
  • Motor cover color: Black
  • Packaging: Carton box

The DKC600 sliding garage door motor is suitable for most residential sliding gates.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
2 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
External Antenna
1 pcs

External Antenna

It enhances the signal range, allowing the use of remote controls from a greater distance. It is usually installed outside of metal shutters, as the metal surface obstructs the signal from going out.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Mechanism for automating sliding gates and garage doors up to 600kg.

Product Code (SKU): DKC600-WIZ-SET-2-RED
Maximum door leaf weight: 600kg
Motor power: 280Watt
Mechanism type: Permanent lubrication with grease, Non-reversible
Open/close cycles per hour: for a door of indicative length 5 m, at 20°C: up to 25
Operating voltage of motor: 230VAC (single-phase)

What is included in the initial set:

  • 1 DKC600 motor
  • 2 release keys (for manual operation)
  • 1 metal support base
  • 4 M8 galvanized anchors
  • 8 Ø8 galvanized washers
  • 8 M8 nuts
  • 2 metal sheets (stop plates) for activating the limit switches
  • 4 M6 screws for the stop plates
  • 4 Ø8mm grover washers for the stop plates
  • 1 capacitor 12.5 μF
  • 1 user manual
  • 1 electronic control panel with built-in receiver
  • 2 remote controls with 4 buttons
  • 1 set of safety photocells (wired: transmitter & receiver)
  • 1 operation notification light

In a separate package with dimensions 1210mm x 60mm x 30mm, 4 meters of metal rack module 4 (toothed rail) with spacers and screws are included.

Technical Specifications:

  • Power supply voltage: 230VAC
  • Motor power consumption: 280Watt
  • Input current: 1.3A
  • Motor speed: 1400rpm
  • Capacitance: 12.5 μF
  • Maximum door weight: 600kg
  • Mechanism type: Electromechanical permanent lubrication with grease, non-reversible
  • Internal gears: Metal
  • Maximum usage frequency: S3: 30% at 20°C S2: 10min
  • Maximum leaf speed: 13m/min
  • Motor winding thermal protection: 120°C
  • Gear type: Z17 / m4 (17 teeth / module 4)
  • Type of limit switches: Mechanical - with microswitches and spring
  • Decoupling method: With key (door that unlocks with a key)
  • Operating temperature range: -20°C to +55°C
  • Degree of protection against dust and moisture: IP-44
  • Sound pressure level: <56dB
  • Motor weight: 10Kg
  • Motor dimensions: 237mm x 213 mm x 270 mm (Length x Width x Height - including the gear but excluding the support base)
  • Motor box dimensions: 270mm x 255mm x 320mm (Length x Width x Height)
  • Motor cover color: Black
  • Packaging: Carton box

The DKC600 sliding garage door motor is suitable for most residential sliding gates.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
2 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
External Antenna
1 pcs

External Antenna

It enhances the signal range, allowing the use of remote controls from a greater distance. It is usually installed outside of metal shutters, as the metal surface obstructs the signal from going out.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

279,00 €
38,00 €   shipping cost