Garage Door Motor Set

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 600kg

The Next Systems motor kit automates sliding garage and driveway gates weighing up to 600 kg. The electromechanical mechanism is permanently grease-lubricated, non-reversible and fitted with metal...

The Next Systems motor kit automates sliding garage and driveway gates weighing up to 600 kg. The electromechanical mechanism is permanently grease-lubricated, non-reversible and fitted with metal internal gears. The motor operates at 230 VAC and has a power rating of 280 W.

For a gate with a nominal length of 5 m at a temperature of 20 °C, it supports up to...

See full description See full description
269 00 €
Delivery by Thu, 12 Nov
38,00 €   shipping cost
Sent from Greece
From NextSystems
Greece
20+ pieces
See Garage Door Mechanisms on the page of NextSystems

Learn more about invoicing

Description

Description

The Next Systems motor kit automates sliding garage and driveway gates weighing up to 600 kg. The electromechanical mechanism is permanently grease-lubricated, non-reversible and fitted with metal internal gears. The motor operates at 230 VAC and has a power rating of 280 W.

For a gate with a nominal length of 5 m at a temperature of 20 °C, it supports up to 25 opening and closing cycles per hour. The maximum gate leaf speed is 13 m/min, while the motor winding thermal protection activates at 120 °C. The kit includes 4 m of rack, safety photocells and an operating signal light.

  • Motor type: Sliding garage door
  • Maximum gate leaf weight: 600 kg
  • Motor power: 280 W
  • Operating voltage: 230 VAC, single-phase
  • Mechanism: Electromechanical, permanently grease-lubricated and non-reversible
  • Internal gears: Metal
  • Opening and closing cycles per hour: Up to 25 for a gate with a nominal length of 5 m at 20 °C
  • Maximum gate leaf speed: 13 m/min
  • Motor winding thermal protection: 120 °C
  • Duty cycle: S3: 30% at 20 °C, S2: 10 min
  • Gear type: Z17 / m4
  • Limit switches: Mechanical, with microswitches and spring
  • Manual release: Key-operated
  • Operating temperature: From -20 °C to +55 °C
  • Protection rating: IP-44
  • Motor weight: 10 kg
  • Motor dimensions: 237 × 213 × 270 mm, including the gear and excluding the mounting base
  • Motor cover colour: Black
  • Package contents: 1 motor, 1 electronic control panel with built-in receiver, 1 four-button remote control, 4 m of module 4 metal rack with spacers and screws, 2 manual release keys, 1 metal mounting base, 4 galvanised M8 anchor bolts, 8 galvanised Ø8 washers, 8 M8 nuts, 2 metal limit switch activation plates, 4 M6 screws, 4 Ø8 mm spring washers, 1 12.5 μF capacitor, 1 user manual, 1 set of wired safety photocells with transmitter and receiver, 1 operating signal light

Manufacturer

See full description

Specifications

Specifications

Specifications

Motor type
Sliding
Maximum Weight
600 kg
Built-in Control Panel
No
Wi-Fi
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
1 pcs
Security Beacon
1 pcs
Photocells
2 pcs
External Antenna
1 pcs
Gear Rack
4 m

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Next Systems motor kit automates sliding garage and driveway gates weighing up to 600 kg. The electromechanical mechanism is permanently grease-lubricated, non-reversible and fitted with metal internal gears. The motor operates at 230 VAC and has a power rating of 280 W.

For a gate with a nominal length of 5 m at a temperature of 20 °C, it supports up to 25 opening and closing cycles per hour. The maximum gate leaf speed is 13 m/min, while the motor winding thermal protection activates at 120 °C. The kit includes 4 m of rack, safety photocells and an operating signal light.

  • Motor type: Sliding garage door
  • Maximum gate leaf weight: 600 kg
  • Motor power: 280 W
  • Operating voltage: 230 VAC, single-phase
  • Mechanism: Electromechanical, permanently grease-lubricated and non-reversible
  • Internal gears: Metal
  • Opening and closing cycles per hour: Up to 25 for a gate with a nominal length of 5 m at 20 °C
  • Maximum gate leaf speed: 13 m/min
  • Motor winding thermal protection: 120 °C
  • Duty cycle: S3: 30% at 20 °C, S2: 10 min
  • Gear type: Z17 / m4
  • Limit switches: Mechanical, with microswitches and spring
  • Manual release: Key-operated
  • Operating temperature: From -20 °C to +55 °C
  • Protection rating: IP-44
  • Motor weight: 10 kg
  • Motor dimensions: 237 × 213 × 270 mm, including the gear and excluding the mounting base
  • Motor cover colour: Black
  • Package contents: 1 motor, 1 electronic control panel with built-in receiver, 1 four-button remote control, 4 m of module 4 metal rack with spacers and screws, 2 manual release keys, 1 metal mounting base, 4 galvanised M8 anchor bolts, 8 galvanised Ø8 washers, 8 M8 nuts, 2 metal limit switch activation plates, 4 M6 screws, 4 Ø8 mm spring washers, 1 12.5 μF capacitor, 1 user manual, 1 set of wired safety photocells with transmitter and receiver, 1 operating signal light

Manufacturer

Specifications

Motor type
Sliding
Maximum Weight
600 kg
Built-in Control Panel
No
Wi-Fi
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
1 pcs
Security Beacon
1 pcs
Photocells
2 pcs
External Antenna
1 pcs
Gear Rack
4 m

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

269,00 €
38,00 €   shipping cost