Skroutz.mt

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 1000kg
Garage Door Motor Set

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 1000kg

The Next Systems SL1000-ED4-FULL-KIT motor kit automates sliding garage and driveway gates weighing up to 1,000 kg. The motor operates with an oil-bath mechanism, is non-reversible, and is powered by...

The Next Systems SL1000-ED4-FULL-KIT motor kit automates sliding garage and driveway gates weighing up to 1,000 kg. The motor operates with an oil-bath mechanism, is non-reversible, and is powered by 230 VAC. For a gate approximately 5 m long at a temperature of 20 °C, it supports up to 35 opening and closing cycles per hour.

The kit includes an electronic...

See full description See full description
350 00 €
Delivery by Thu, 12 Nov
38,00 €   shipping cost
Sent from Greece
From NextSystems
Greece
20+ pieces
See Garage Door Mechanisms on the page of NextSystems

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Next Systems SL1000-ED4-FULL-KIT motor kit automates sliding garage and driveway gates weighing up to 1,000 kg. The motor operates with an oil-bath mechanism, is non-reversible, and is powered by 230 VAC. For a gate approximately 5 m long at a temperature of 20 °C, it supports up to 35 opening and closing cycles per hour.

The kit includes an electronic control board with a built-in receiver, two four-button remote controls, and wired safety photocells with a transmitter and receiver. The metal module 4 rack comes with spacers and screws. The motor is disengaged with a key, allowing the gate to be operated manually.

  • Motor type: Sliding garage gate
  • Maximum gate weight: 1,000 kg
  • Motor power: 400 W
  • Operating voltage: 230 VAC, single-phase
  • Mechanism: Oil-bath, non-reversible
  • Opening and closing cycles per hour: Up to 35, for a gate approximately 5 m long at 20 °C
  • Maximum duty cycle: S3: 70% at 20 °C, S2: 20 min
  • Maximum gate speed: 13 m/min
  • Internal gears: Metal
  • Gear type: Z17 / m4, 17 teeth
  • Limit switches: Mechanical, with microswitches and spring
  • Disengagement: Key-operated
  • Winding thermal protection: 120 °C
  • Operating temperature: From -20 °C to +55 °C
  • Protection rating: IP-44
  • Motor weight: 16 kg
  • Motor dimensions: 271 × 228 × 280 mm, excluding the mounting base
  • Cover color: Black
  • Control board: 1 piece, with built-in receiver
  • Remote controls: 2 pieces, with 4 buttons each
  • Rack: 4 m, metal, module 4, with spacers and screws
  • Safety photocells: 1 wired set with transmitter and receiver
  • Motor: 1 piece
  • Disengagement keys: 2 pieces
  • Mounting base: 1 metal base
  • Anchors: 4 galvanized, M10
  • Washers: 8 galvanized, Ø10
  • Nuts: 8 pieces, M10
  • Stop plates: 2 metal plates
  • Screws for stop plates: 4 pieces, M6
  • Spring washers for stop plates: 4 pieces, Ø10 mm
  • Capacitor: 1 piece
  • User manual: 1 piece

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
1000 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No
Wi-Fi
No

Wi-Fi

Allows remote control and monitoring of the motor via a smartphone app, by connecting it to the home Wi-Fi network.

Set Contents

Motor
1 pcs
Control Panel
1 pcs

Control Panel

1

It regulates and manages the operation of the motor, the commands from the remote controls, and the safety accessories.
Remote Control
2 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Next Systems SL1000-ED4-FULL-KIT motor kit automates sliding garage and driveway gates weighing up to 1,000 kg. The motor operates with an oil-bath mechanism, is non-reversible, and is powered by 230 VAC. For a gate approximately 5 m long at a temperature of 20 °C, it supports up to 35 opening and closing cycles per hour.

The kit includes an electronic control board with a built-in receiver, two four-button remote controls, and wired safety photocells with a transmitter and receiver. The metal module 4 rack comes with spacers and screws. The motor is disengaged with a key, allowing the gate to be operated manually.

  • Motor type: Sliding garage gate
  • Maximum gate weight: 1,000 kg
  • Motor power: 400 W
  • Operating voltage: 230 VAC, single-phase
  • Mechanism: Oil-bath, non-reversible
  • Opening and closing cycles per hour: Up to 35, for a gate approximately 5 m long at 20 °C
  • Maximum duty cycle: S3: 70% at 20 °C, S2: 20 min
  • Maximum gate speed: 13 m/min
  • Internal gears: Metal
  • Gear type: Z17 / m4, 17 teeth
  • Limit switches: Mechanical, with microswitches and spring
  • Disengagement: Key-operated
  • Winding thermal protection: 120 °C
  • Operating temperature: From -20 °C to +55 °C
  • Protection rating: IP-44
  • Motor weight: 16 kg
  • Motor dimensions: 271 × 228 × 280 mm, excluding the mounting base
  • Cover color: Black
  • Control board: 1 piece, with built-in receiver
  • Remote controls: 2 pieces, with 4 buttons each
  • Rack: 4 m, metal, module 4, with spacers and screws
  • Safety photocells: 1 wired set with transmitter and receiver
  • Motor: 1 piece
  • Disengagement keys: 2 pieces
  • Mounting base: 1 metal base
  • Anchors: 4 galvanized, M10
  • Washers: 8 galvanized, Ø10
  • Nuts: 8 pieces, M10
  • Stop plates: 2 metal plates
  • Screws for stop plates: 4 pieces, M6
  • Spring washers for stop plates: 4 pieces, Ø10 mm
  • Capacitor: 1 piece
  • User manual: 1 piece

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
1000 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Built-in Control Panel
No
Wi-Fi
No

Wi-Fi

Allows remote control and monitoring of the motor via a smartphone app, by connecting it to the home Wi-Fi network.

Set Contents

Motor
1 pcs
Control Panel
1 pcs

Control Panel

1

It regulates and manages the operation of the motor, the commands from the remote controls, and the safety accessories.
Remote Control
2 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

350,00 €
38,00 €   shipping cost