Skroutz.mt

Alpinestars Supertech M5 Motorcycle Helmet Motocross DOT 1260gr
Motorcycle Helmets

Alpinestars Supertech M5 Motorcycle Helmet Motocross DOT 1260gr Code: 8303823-9350

Multi-density inner lining to ensure the correct density in the right area for improved shock absorption.

High level of ventilation and heat transfer thanks to multiple air inlets and exhaust vents....

Multi-density inner lining to ensure the correct density in the right area for improved shock absorption.

High level of ventilation and heat transfer thanks to multiple air inlets and exhaust vents. The visor is designed to direct air into the ports.

The outer and inner surfaces are designed to minimize the effects of oblique impacts.

The emergency release...

See full description See full description

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    DOT

    Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

Alpinestars size guide
Alpinestars size guide
274,99 €
219 99 €
-20%
price drop
Delivery Fri, 10 Jul - Thu, 16 Jul
17,00 €   shipping cost
Sent from Greece
From MotoHub 4.9 (7)
4.9 (7 reviews)
Greece
See Rider Equipment on the page of MotoHub
Product report

Description

Description

Multi-density inner lining to ensure the correct density in the right area for improved shock absorption.

High level of ventilation and heat transfer thanks to multiple air inlets and exhaust vents. The visor is designed to direct air into the ports.

The outer and inner surfaces are designed to minimize the effects of oblique impacts.

The emergency release system and removable cheek pads allow for safe and easy removal of the helmet while still on the rider's head.

The Comfort lining is removable and features Silverplus® padding which is antibacterial, wicks away moisture, and removes sweat from the skin.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
8303823-9350

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1260 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
DOT

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

DOT

Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • marios_kxaras
    5
    1 out of 1 members found this review helpful
    marios_kxaras

    Very nice helmet fits nicely and is made according to motocross specifications i.e. when you take it off it's a bit difficult (which is normal for falls), very light compared to others like the fox v1 1600gr while this one is 1260gr resulting in it being very comfortable and above all the fastening which is with straps and not with clips.

    Translated from Greek ·
    • Application
    • Construction quality
    • Visibility
    • Low aerodynamic noise
    • Weight
    • Value for money
    Did you find this review helpful?
  • marios_kxaras
    5
    marios_kxaras

    Very nice helmet fits nicely and is made according to motocross specifications i.e. when you take it off it's a bit difficult (which is normal for falls), very light compared to others like the fox v1 1600gr while this one is 1260gr resulting in it being very comfortable and above all the fastening which is with straps and not with clips.

    Translated from Greek ·
    1
  • See all

Description & Specifications

Multi-density inner lining to ensure the correct density in the right area for improved shock absorption.

High level of ventilation and heat transfer thanks to multiple air inlets and exhaust vents. The visor is designed to direct air into the ports.

The outer and inner surfaces are designed to minimize the effects of oblique impacts.

The emergency release system and removable cheek pads allow for safe and easy removal of the helmet while still on the rider's head.

The Comfort lining is removable and features Silverplus® padding which is antibacterial, wicks away moisture, and removes sweat from the skin.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
8303823-9350

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1260 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
DOT

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

DOT

Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • marios_kxaras
    5
    1 out of 1 members found this review helpful
    marios_kxaras

    Very nice helmet fits nicely and is made according to motocross specifications i.e. when you take it off it's a bit difficult (which is normal for falls), very light compared to others like the fox v1 1600gr while this one is 1260gr resulting in it being very comfortable and above all the fastening which is with straps and not with clips.

    Translated from Greek ·
    • Application
    • Construction quality
    • Visibility
    • Low aerodynamic noise
    • Weight
    • Value for money
    Did you find this review helpful?
  • marios_kxaras
    5
    marios_kxaras

    Very nice helmet fits nicely and is made according to motocross specifications i.e. when you take it off it's a bit difficult (which is normal for falls), very light compared to others like the fox v1 1600gr while this one is 1260gr resulting in it being very comfortable and above all the fastening which is with straps and not with clips.

    Translated from Greek ·
    1
  • See all
219,99 €
17,00 €   shipping cost