Home Intercom

Akuvox Doorbell Akuvox v1 Black

Features

  • Body material: Plastic
  • Camera: 2M pixels
  • Viewing angle: 120°, automatic lighting
  • Compatible with ONVIF standard for easy integration into any network monitoring system
  • RF card reader:...

Features

  • Body material: Plastic
  • Camera: 2M pixels
  • Viewing angle: 120°, automatic lighting
  • Compatible with ONVIF standard for easy integration into any network monitoring system
  • RF card reader: 13.56MHz & 125kHz
  • Output: 2 relays for door opening
  • IEEE 802.3af Power-over-Ethernet

Specifications

  • Camera viewing angle: 116° (H), 60° (V)
  • Two-way audio...
See full description See full description

Description

Description

Features

  • Body material: Plastic
  • Camera: 2M pixels
  • Viewing angle: 120°, automatic lighting
  • Compatible with ONVIF standard for easy integration into any network monitoring system
  • RF card reader: 13.56MHz & 125kHz
  • Output: 2 relays for door opening
  • IEEE 802.3af Power-over-Ethernet

Specifications

  • Camera viewing angle: 116° (H), 60° (V)
  • Two-way audio communication via IP networks with echo cancellation capability
  • Compatible with SIP standard for easy integration into SIP-compatible PBXs
  • Front panel: Plastic
  • Camera data: 2M pixels, automatic lighting
  • Button: 1 call button
  • Light sensor: Support
  • Infrared sensor: Support
  • Wiegand port: Support
  • Relay output: 2
  • Inputs: 2
  • Microphone: -40dB
  • Speaker: 4Ω / 3W
  • Ethernet port: RJ45, 10/100Mbps
  • 12V DC connector (in case of non-PoE use)
  • Installation: Wall mount
  • Dimensions: 145x85x27.5mm
  • Operating humidity: 10~90%
  • Operating temperature: -20°C ~ +65°C
  • Storage temperature: -40°C ~ +70°C
  • Audio system: SIP v1 (RFC2543), SIP v2 (RFC3261)
  • Audio codec: G.711a, G.711μ, G.729
  • Compatible audio codec: G.722
  • DTMF: In-band, out-of-band DTMF (RFC2833)
  • Echo cancellation: Support
  • Voice recognition: Support
  • Comfort noise generation: Support
  • Video sensor: 1/2.7”, CMOS
  • Video resolution: up to 1280x720p
  • Maximum frame rate: 720p - 30fps
  • Video viewing angle: 116° (H) / 60° (V)
  • Compatible with third-party video components, e.g., NVRs
  • Door recognition capability: DTMF tone-controlled relays
  • Night mode with automatic LED lighting
  • Automatic white balance
  • Minimum illumination: 0.1LUX
  • Supported protocols: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP
  • Self-Provisioning
  • Web management portal
  • Web packet storage
  • Configuration backup/restore
  • Access log export
  • Import/export access table
  • Firmware upgrade
  • System logs (including access logs)
  • Application point: Office intercom with local or hosted IP-PBX
  • Remote site entry via Internet
  • Apartment handset with door access control

Manufacturer

See full description

Specifications

Specifications

Specifications

Product Type
Bell
Wireless
No
with Screen
No
with Camera
No

Smart Attributes

Connectivity
RF

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Features

  • Body material: Plastic
  • Camera: 2M pixels
  • Viewing angle: 120°, automatic lighting
  • Compatible with ONVIF standard for easy integration into any network monitoring system
  • RF card reader: 13.56MHz & 125kHz
  • Output: 2 relays for door opening
  • IEEE 802.3af Power-over-Ethernet

Specifications

  • Camera viewing angle: 116° (H), 60° (V)
  • Two-way audio communication via IP networks with echo cancellation capability
  • Compatible with SIP standard for easy integration into SIP-compatible PBXs
  • Front panel: Plastic
  • Camera data: 2M pixels, automatic lighting
  • Button: 1 call button
  • Light sensor: Support
  • Infrared sensor: Support
  • Wiegand port: Support
  • Relay output: 2
  • Inputs: 2
  • Microphone: -40dB
  • Speaker: 4Ω / 3W
  • Ethernet port: RJ45, 10/100Mbps
  • 12V DC connector (in case of non-PoE use)
  • Installation: Wall mount
  • Dimensions: 145x85x27.5mm
  • Operating humidity: 10~90%
  • Operating temperature: -20°C ~ +65°C
  • Storage temperature: -40°C ~ +70°C
  • Audio system: SIP v1 (RFC2543), SIP v2 (RFC3261)
  • Audio codec: G.711a, G.711μ, G.729
  • Compatible audio codec: G.722
  • DTMF: In-band, out-of-band DTMF (RFC2833)
  • Echo cancellation: Support
  • Voice recognition: Support
  • Comfort noise generation: Support
  • Video sensor: 1/2.7”, CMOS
  • Video resolution: up to 1280x720p
  • Maximum frame rate: 720p - 30fps
  • Video viewing angle: 116° (H) / 60° (V)
  • Compatible with third-party video components, e.g., NVRs
  • Door recognition capability: DTMF tone-controlled relays
  • Night mode with automatic LED lighting
  • Automatic white balance
  • Minimum illumination: 0.1LUX
  • Supported protocols: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP
  • Self-Provisioning
  • Web management portal
  • Web packet storage
  • Configuration backup/restore
  • Access log export
  • Import/export access table
  • Firmware upgrade
  • System logs (including access logs)
  • Application point: Office intercom with local or hosted IP-PBX
  • Remote site entry via Internet
  • Apartment handset with door access control

Manufacturer

Specifications

Product Type
Bell
Wireless
No
with Screen
No
with Camera
No

Smart Attributes

Connectivity
RF

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

211,00 €
14,00 €   shipping cost