Skroutz.mt

Maestro Omega-250 Inverter MAG / MIG / MMA / TIG Welding Machine with Maximum Welding Current of 250A and 60% Duty Cycle
Welding Machines

Maestro Omega-250 Inverter MAG / MIG / MMA / TIG Welding Machine with Maximum Welding Current of 250A and 60% Duty Cycle

The Maestro Omega-250 welder supports MAG, MIG, MMA and TIG welding, with a maximum current of 250 A. IGBT inverter technology and Synergy mode automatically adjust the welding parameters. Pulse mode...

The Maestro Omega-250 welder supports MAG, MIG, MMA and TIG welding, with a maximum current of 250 A. IGBT inverter technology and Synergy mode automatically adjust the welding parameters. Pulse mode helps produce clean welds with minimal spatter and reduced heat distortion.

It supports 2T and 4T modes, as well as 5 kg and 15 kg wire spools. It can also be...

See full description See full description

Top specs

  • Welding Current

    250

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    220

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    8

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
690 00 €
Delivery Wed, 18 Nov - Fri, 20 Nov
17,00 €   shipping cost
Sent from Greece
From Mplanas 4.9 (50)
4.9 (50 reviews)
Greece
See Tools on the page of Mplanas

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Maestro Omega-250 welder supports MAG, MIG, MMA and TIG welding, with a maximum current of 250 A. IGBT inverter technology and Synergy mode automatically adjust the welding parameters. Pulse mode helps produce clean welds with minimal spatter and reduced heat distortion.

It supports 2T and 4T modes, as well as 5 kg and 15 kg wire spools. It can also be used without gas.

  • Welding processes: MAG, MIG, MMA, TIG
  • Technology: IGBT inverter
  • Synergy mode: Automatic adjustment of welding parameters
  • Welding current: Up to 250 A
  • Duty cycle: 60%
  • Pulse mode: Yes
  • Hot Start: Yes
  • Modes: 2T and 4T
  • Supply voltage: 220 V
  • Power: 8 kVA
  • Maximum wire diameter: 1 mm
  • Supported wire spool sizes: 5 kg and 15 kg
  • Weight: 5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
250 A

Welding Current (max): 250


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Power
8 kVA

Power: 8


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
5000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Maestro Omega-250 welder supports MAG, MIG, MMA and TIG welding, with a maximum current of 250 A. IGBT inverter technology and Synergy mode automatically adjust the welding parameters. Pulse mode helps produce clean welds with minimal spatter and reduced heat distortion.

It supports 2T and 4T modes, as well as 5 kg and 15 kg wire spools. It can also be used without gas.

  • Welding processes: MAG, MIG, MMA, TIG
  • Technology: IGBT inverter
  • Synergy mode: Automatic adjustment of welding parameters
  • Welding current: Up to 250 A
  • Duty cycle: 60%
  • Pulse mode: Yes
  • Hot Start: Yes
  • Modes: 2T and 4T
  • Supply voltage: 220 V
  • Power: 8 kVA
  • Maximum wire diameter: 1 mm
  • Supported wire spool sizes: 5 kg and 15 kg
  • Weight: 5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
250 A

Welding Current (max): 250


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Power
8 kVA

Power: 8


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
5000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

690,00 €
17,00 €   shipping cost