Skroutz.mt

Maestro Lynx-200 Welding Machine MIG / TIG / MMA with Maximum Welding Current 200A and Duty Cycle 60%
Welding Machines

Maestro Lynx-200 Welding Machine MIG / TIG / MMA with Maximum Welding Current 200A and Duty Cycle 60%

LYNX-200 Welding Machine Wire & Electrode MIG/TIG/MMA 200A

Features:

  • Performance: 60% 200A
  • KVA: 11.3
  • Wire: 0.8 - 1.0
  • IGBT INVERTER
  • MAG/MIG, MMA, LIFT TIG
  • HOT START
  • Voltage: 220V
  • Ability to use wire...

LYNX-200 Welding Machine Wire & Electrode MIG/TIG/MMA 200A

Features:

  • Performance: 60% 200A
  • KVA: 11.3
  • Wire: 0.8 - 1.0
  • IGBT INVERTER
  • MAG/MIG, MMA, LIFT TIG
  • HOT START
  • Voltage: 220V
  • Ability to use wire without gas FLUX (gasless)
  • Wire diameter: 0.8-1.0 / 1kg or 5kg
  • Protection Degree: IP 21 S / H
  • MIG clamp 3m
  • Electrode clamp 3m
  • Ground clamp 3m
  • Mask
  • Brush
  • Weight:...
See full description See full description

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    220

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    11.3

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
450 00 €
Delivery Thu, 30 Jul - Mon, 03 Aug
17,00 €   shipping cost
Sent from Greece
From Mplanas 5.0 (53)
5.0 (53 reviews)
Greece
2 pieces
See Tools on the page of Mplanas
Review the product
Product report

Description

Description

LYNX-200 Welding Machine Wire & Electrode MIG/TIG/MMA 200A

Features:

  • Performance: 60% 200A
  • KVA: 11.3
  • Wire: 0.8 - 1.0
  • IGBT INVERTER
  • MAG/MIG, MMA, LIFT TIG
  • HOT START
  • Voltage: 220V
  • Ability to use wire without gas FLUX (gasless)
  • Wire diameter: 0.8-1.0 / 1kg or 5kg
  • Protection Degree: IP 21 S / H
  • MIG clamp 3m
  • Electrode clamp 3m
  • Ground clamp 3m
  • Mask
  • Brush
  • Weight: 7.1Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, TIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Power
11.3 kVA

Power: 11.3


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
5000 gr

Additional Features

Inverter
No
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

LYNX-200 Welding Machine Wire & Electrode MIG/TIG/MMA 200A

Features:

  • Performance: 60% 200A
  • KVA: 11.3
  • Wire: 0.8 - 1.0
  • IGBT INVERTER
  • MAG/MIG, MMA, LIFT TIG
  • HOT START
  • Voltage: 220V
  • Ability to use wire without gas FLUX (gasless)
  • Wire diameter: 0.8-1.0 / 1kg or 5kg
  • Protection Degree: IP 21 S / H
  • MIG clamp 3m
  • Electrode clamp 3m
  • Ground clamp 3m
  • Mask
  • Brush
  • Weight: 7.1Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, TIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Power
11.3 kVA

Power: 11.3


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
5000 gr

Additional Features

Inverter
No
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

450,00 €
17,00 €   shipping cost