Monto Multi-Coat wood paint can be applied to wood, wall tiles, plaster, cement, concrete, brick, plasterboard, metals, glass and PVC, for interior and exterior use. It has anti-corrosive properties and can be recoated after an extended period without affecting its properties. The UNE EN ISO 2409:13 adhesion certification applies to iron, galvanised iron and aluminium.
Thin with water; tools can also be cleaned with water. Apply with a brush, roller or spray gun in one or two coats. For airless spray guns, air-mix spray guns, airbrush spray guns and low-pressure Turbo sprayers, the recommended dilution is 0–10%.
- Type: Wood paint
- Volume: 2.5 L
- Finish: Satin
- Colour: White
- Coverage: 10–15 m²/L, depending on the surface’s absorbency
- Application: Interior and exterior use
- Suitable surfaces: Wood, wall tiles, plaster, cement, concrete, brick, plasterboard, steel, galvanised iron, aluminium, copper, brass, glass and PVC
- Drying time: Touch-dry in 30–60 minutes at 20 °C
- Recoating time: 6 hours with emulsion paint, 12 hours with varnish and 24 hours with two-component paint
- Application thickness: 100–150 μm wet film and 60–90 μm dry film
- Thinning and tool cleaning: Water
- Application tools: Brush, roller and spray gun
- Adhesion certification: UNE EN ISO 2409:13 for iron, galvanised iron and aluminium
- Reaction-to-fire classification: UNE EN 13501-1:07:B-s1-d0
- Application instructions: Stir until uniform; apply at temperatures of 5–35 °C and relative humidity below 80%
Specifications
- Type
- Wood Paint
- Acrilyc
- No
- Luminosity
- Satine
Quantity
- Volume
- 2.5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.