Skroutz.mt

Kolink Observatory MX Glass ARGB Gaming Midi Tower Computer Case with Side Window Black
Computer Cases

Kolink Observatory MX Glass ARGB Gaming Midi Tower Computer Case with Side Window Black

Key features:

  • Front panel made of Tempered Glass
  • ATX Motherboard support
  • Five pre-installed fans
  • Four storage drive bays
See full description

  • Internal 3.5'' Bays

    Installation locations for hard drives of corresponding size (usually HDD).

  • Internal Ports 2.5''

    Installation locations for hard disks of corresponding size (usually SSDs).

  • Connectivity

    USB 2.0

    Older version, compatible with almost all devices but with slower data transfer speed (480Mbit/s.) compared to newer versions.

    USB 3.0

    Faster data transfer (5 Gbit/s) than USB 2.0. Compatible with older versions. Also referred to as USB 3.1 Gen 1 / 3.2 Gen 1.

  • Add-ons

    RGB Lighting

    Boxes with integrated RGB multi-color lighting. The RGB lighting can take on various shades by combining the colors red, green, and blue, offering a modern aesthetic result commonly seen in gaming computers.

    Side Window

    It has a side window to make the interior visible without opening the case.
  • See all
Product report

Description

Description

Kolink Observatory MX RGB Tempered Glass Black PGW-CH-KOL-113, colorful and functional!

Main features:

  • Built-in ventilation for natural airflow
  • Keeping components cool

Optimal Airflow

The Kolink Observatory MX series features two styles, each available in three color options. You can choose between the Glass or Mesh versions, and then select black, white, or black-and-white color. This is the Glass model. The front panel is made of Tempered Glass, with fine side ventilation using Mesh. To ensure that this case has ample airflow, the dedicated PSU cover is designed with Mesh lining.

Generous hardware support

Beyond its good appearance, the Kolink Observatory MX Glass offers incredible support for a variety of hardware. It can accommodate a Mini-ITX, Micro-ATX, or ATX motherboard, with seven expansion slots for PCIe devices, and there is space for GPUs up to 330mm. The dedicated PSU cover can accommodate power supplies up to 180mm. There is also a storage drive cage with four slots. Two can accommodate either 2.5" SSDs or 3.5" hard drives, while the other two are for 2.5" only.

Airflow Forever

To keep your computer at optimal temperature, the Kolink Observatory MX Glass can support both air and water cooling. There are five pre-installed Kolink Umbra ARGB/PWM fans to enhance airflow. The front features two 140mm fans. On the top, there are two 120mm models, and the rear also has a 120mm fan. Alternatively, there is support for radiators and additional fans throughout the case. The front panel can accommodate up to two 140mm fans or a radiator with a length of 240mm, 280mm, or 360mm. For the rear panel, the 120mm fan mount can instead support a 120mm radiator. The top panel can only support the two 120mm fans, but there are also two 120mm brackets on the PSU cover to provide dedicated cooling for the second chamber. Finally, the Kolink Observatory MX Glass has space for a CPU Cooler up to 160mm in height.

Additional features

The Kolink Observatory MX Glass features a USB 3.0 port, a USB 2.0 port, and an HD audio jack on the IO Panel. There is also a Restart button that can be used to control the fans. Alternatively, the fans can be connected via a 3-Pin 5V Header and controlled through the lead fan.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Colour
Black
Size
Midi Tower

Size

Midi Tower

The most popular size of case. Provides space and flexibility for simple or demanding use. Accommodates ATX and micro ATX motherboards.
Compatible Motherboard Type
ATX, Micro ATX, Mini ITX

Compatible Motherboard Type

The sizes of the motherboards that fit in the case.

Dimensions

Height
440 mm
Width
200 mm
Length
350 mm

Internal Spaces

Maximum Graphics Card Length
330 mm
Maximum Processor Heatsink Height
160 mm

Drive Bays

Internal Hub 3.5"
2

Internal Hub 3.5"

Installation locations for hard drives of corresponding size (usually HDD).
Internal Hub 2.5"
2

Internal Hub 2.5"

Installation locations for hard disks of corresponding size (usually SSDs).

Fan Positions

Front
2
Rear
1
Top Positions
2

Water Cooling

Radiator Position
Front, Back

Radiator Position

At which point of the box is there a socket for installing a water-cooled refrigerator? This is for experienced users who want to install such a cooling system.

Specifications

Connectivity
USB 2.0, USB 3.0

Connectivity

USB 2.0

Older version, compatible with almost all devices but with slower data transfer speed (480Mbit/s.) compared to newer versions.

USB 3.0
Faster data transfer (5 Gbit/s) than USB 2.0. Compatible with older versions. Also referred to as USB 3.1 Gen 1 / 3.2 Gen 1.
Extras
RGB Lighting, Side Window, Pre-installed Fans

Extras

RGB Lighting

Boxes with integrated RGB multi-color lighting. The RGB lighting can take on various shades by combining the colors red, green, and blue, offering a modern aesthetic result commonly seen in gaming computers.

Side Window

It has a side window to make the interior visible without opening the case.
Gaming
Yes
Airflow
No
Home & Office
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (7)

Reviews

4.7
7
4.7
Review this product
  1. 5
  2. 2
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Space
  • Cable management
  • Construction quality
  • Silent
  • Dust filtering
  • Air flow
  • Value for money

Reviews by our members

  • nikos_koustenis4414
    5
    1 out of 1 members found this review helpful
    nikos_koustenis4414

    Very nice case, I chose it because a friend asked me to build him a powerful computer with a small case, it comes with 5 pre-installed 120mm ARGB fans.

    Everything fit perfectly, easy installation, plenty of space,

    Sturdy case

    I highly recommend it!!!

    I combined it with
    psu thermaltake 750w rgb
    M/b gigabyte b550
    Cpu Amd Ryzen 7 5700g
    Cooler Raijintek eleos rgb
    Ram g skill 3600 32gb
    Nvme patriot 256gb

    Translated from Greek ·
    Did you find this review helpful?
  • geo_moula
    4
    geo_moula

    Verified purchase

    The good:

    Relatively small footprint for a midi case
    It has filters on the top and bottom vents.

    Plenty of space for 4 2.5'' SSD/HDD and 2 for 3.5 HDD, and you can remove them easily.

    It is quite sturdy for the price and size.

    Comes with pre-installed ARGB fans that are already cable managed.

    The panels are very easy to remove and install.

    Airflow seems good, but I need to look into it more.

    The PCIe covers are with screws and can be re-installed, unlike other cases in its price range.

    All the fan rails take both 120'' and 140''.

    The bad:
    On the right and front panel, there is mesh for about 10 cm, which helps with airflow but lets dust through easily.

    Space for cable management is average, and the CPU cable doesn't pass if the motherboard is installed, and if the cable is passed, it will complicate the installation of the motherboard. Depending on the PSU, it will obstruct the back panel.

    The pre-installed fans are noisy and are not PWM; they just connect directly to the PSU, which means the speed cannot be controlled and is always at 100%.

    Overall, it is a good VFM case; personally, I would change the fans as soon as possible.

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    VasilisDavid

    Verified purchase

  • 5
    xaris_xanidis

    Verified purchase

    • Space
    • Cable management
    • Construction quality
    • Silent
    • Dust filtering
    • Air flow
    • Value for money
  • 5
    ΜΑΡΚΟ ΠΕΡΣΚΕΦΑ

    Verified purchase

  • 5
    Stauros_xx

    Verified purchase

    This review is about the colour: White

  • 5
    Kimon_M38

    Verified purchase

    • Space
    • Cable management
    • Construction quality
    • Silent
    • Dust filtering
    • Air flow
    • Value for money
  • nikos_koustenis4414
    5
    nikos_koustenis4414

    Very nice case, I chose it because a friend asked me to build him a powerful computer with a small case, it comes with 5 pre-installed 120mm ARGB fans.

    Everything fit perfectly, easy installation, plenty of space,

    Sturdy case

    I highly recommend it!!!

    I combined it with
    psu thermaltake 750w rgb
    M/b gigabyte b550
    Cpu Amd Ryzen 7 5700g
    Cooler Raijintek eleos rgb
    Ram g skill 3600 32gb
    Nvme patriot 256gb

    Translated from Greek ·
    1
  • geo_moula
    4
    geo_moula

    The good:

    Relatively small footprint for a midi case
    It has filters on the top and bottom vents.

    Plenty of space for 4 2.5'' SSD/HDD and 2 for 3.5 HDD, and you can remove them easily.

    It is quite sturdy for the price and size.

    Comes with pre-installed ARGB fans that are already cable managed.

    The panels are very easy to remove and install.

    Airflow seems good, but I need to look into it more.

    The PCIe covers are with screws and can be re-installed, unlike other cases in its price range.

    All the fan rails take both 120'' and 140''.

    The bad:
    On the right and front panel, there is mesh for about 10 cm, which helps with airflow but lets dust through easily.

    Space for cable management is average, and the CPU cable doesn't pass if the motherboard is installed, and if the cable is passed, it will complicate the installation of the motherboard. Depending on the PSU, it will obstruct the back panel.

    The pre-installed fans are noisy and are not PWM; they just connect directly to the PSU, which means the speed cannot be controlled and is always at 100%.

    Overall, it is a good VFM case; personally, I would change the fans as soon as possible.

    Translated from Greek ·
    0
  • 4
    VasilisDavid

    0
  • 5
    xaris_xanidis

    0
  • 5
    ΜΑΡΚΟ ΠΕΡΣΚΕΦΑ

    0
  • See all

Description & Specifications

Main Specifications

Colour
Black
Size
Midi Tower

Size

Midi Tower

The most popular size of case. Provides space and flexibility for simple or demanding use. Accommodates ATX and micro ATX motherboards.
Compatible Motherboard Type
ATX, Micro ATX, Mini ITX

Compatible Motherboard Type

The sizes of the motherboards that fit in the case.

Dimensions

Height
440 mm
Width
200 mm
Length
350 mm

Internal Spaces

Maximum Graphics Card Length
330 mm
Maximum Processor Heatsink Height
160 mm

Drive Bays

Internal Hub 3.5"
2

Internal Hub 3.5"

Installation locations for hard drives of corresponding size (usually HDD).
Internal Hub 2.5"
2

Internal Hub 2.5"

Installation locations for hard disks of corresponding size (usually SSDs).

Fan Positions

Front
2
Rear
1
Top Positions
2

Water Cooling

Radiator Position
Front, Back

Radiator Position

At which point of the box is there a socket for installing a water-cooled refrigerator? This is for experienced users who want to install such a cooling system.

Specifications

Connectivity
USB 2.0, USB 3.0

Connectivity

USB 2.0

Older version, compatible with almost all devices but with slower data transfer speed (480Mbit/s.) compared to newer versions.

USB 3.0
Faster data transfer (5 Gbit/s) than USB 2.0. Compatible with older versions. Also referred to as USB 3.1 Gen 1 / 3.2 Gen 1.
Extras
RGB Lighting, Side Window, Pre-installed Fans

Extras

RGB Lighting

Boxes with integrated RGB multi-color lighting. The RGB lighting can take on various shades by combining the colors red, green, and blue, offering a modern aesthetic result commonly seen in gaming computers.

Side Window

It has a side window to make the interior visible without opening the case.
Gaming
Yes
Airflow
No
Home & Office
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Description

Kolink Observatory MX RGB Tempered Glass Black PGW-CH-KOL-113, colorful and functional!

Main features:

  • Built-in ventilation for natural airflow
  • Keeping components cool

Optimal Airflow

The Kolink Observatory MX series features two styles, each available in three color options. You can choose between the Glass or Mesh versions, and then select black, white, or black-and-white color. This is the Glass model. The front panel is made of Tempered Glass, with fine side ventilation using Mesh. To ensure that this case has ample airflow, the dedicated PSU cover is designed with Mesh lining.

Generous hardware support

Beyond its good appearance, the Kolink Observatory MX Glass offers incredible support for a variety of hardware. It can accommodate a Mini-ITX, Micro-ATX, or ATX motherboard, with seven expansion slots for PCIe devices, and there is space for GPUs up to 330mm. The dedicated PSU cover can accommodate power supplies up to 180mm. There is also a storage drive cage with four slots. Two can accommodate either 2.5" SSDs or 3.5" hard drives, while the other two are for 2.5" only.

Airflow Forever

To keep your computer at optimal temperature, the Kolink Observatory MX Glass can support both air and water cooling. There are five pre-installed Kolink Umbra ARGB/PWM fans to enhance airflow. The front features two 140mm fans. On the top, there are two 120mm models, and the rear also has a 120mm fan. Alternatively, there is support for radiators and additional fans throughout the case. The front panel can accommodate up to two 140mm fans or a radiator with a length of 240mm, 280mm, or 360mm. For the rear panel, the 120mm fan mount can instead support a 120mm radiator. The top panel can only support the two 120mm fans, but there are also two 120mm brackets on the PSU cover to provide dedicated cooling for the second chamber. Finally, the Kolink Observatory MX Glass has space for a CPU Cooler up to 160mm in height.

Additional features

The Kolink Observatory MX Glass features a USB 3.0 port, a USB 2.0 port, and an HD audio jack on the IO Panel. There is also a Restart button that can be used to control the fans. Alternatively, the fans can be connected via a 3-Pin 5V Header and controlled through the lead fan.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Reviews (7)

4.7
7
4.7
Review this product
  1. 5
  2. 2
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Space
  • Cable management
  • Construction quality
  • Silent
  • Dust filtering
  • Air flow
  • Value for money

Reviews by our members

  • nikos_koustenis4414
    5
    1 out of 1 members found this review helpful
    nikos_koustenis4414

    Very nice case, I chose it because a friend asked me to build him a powerful computer with a small case, it comes with 5 pre-installed 120mm ARGB fans.

    Everything fit perfectly, easy installation, plenty of space,

    Sturdy case

    I highly recommend it!!!

    I combined it with
    psu thermaltake 750w rgb
    M/b gigabyte b550
    Cpu Amd Ryzen 7 5700g
    Cooler Raijintek eleos rgb
    Ram g skill 3600 32gb
    Nvme patriot 256gb

    Translated from Greek ·
    Did you find this review helpful?
  • geo_moula
    4
    geo_moula

    Verified purchase

    The good:

    Relatively small footprint for a midi case
    It has filters on the top and bottom vents.

    Plenty of space for 4 2.5'' SSD/HDD and 2 for 3.5 HDD, and you can remove them easily.

    It is quite sturdy for the price and size.

    Comes with pre-installed ARGB fans that are already cable managed.

    The panels are very easy to remove and install.

    Airflow seems good, but I need to look into it more.

    The PCIe covers are with screws and can be re-installed, unlike other cases in its price range.

    All the fan rails take both 120'' and 140''.

    The bad:
    On the right and front panel, there is mesh for about 10 cm, which helps with airflow but lets dust through easily.

    Space for cable management is average, and the CPU cable doesn't pass if the motherboard is installed, and if the cable is passed, it will complicate the installation of the motherboard. Depending on the PSU, it will obstruct the back panel.

    The pre-installed fans are noisy and are not PWM; they just connect directly to the PSU, which means the speed cannot be controlled and is always at 100%.

    Overall, it is a good VFM case; personally, I would change the fans as soon as possible.

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    VasilisDavid

    Verified purchase

  • 5
    xaris_xanidis

    Verified purchase

    • Space
    • Cable management
    • Construction quality
    • Silent
    • Dust filtering
    • Air flow
    • Value for money
  • 5
    ΜΑΡΚΟ ΠΕΡΣΚΕΦΑ

    Verified purchase

  • 5
    Stauros_xx

    Verified purchase

    This review is about the colour: White

  • 5
    Kimon_M38

    Verified purchase

    • Space
    • Cable management
    • Construction quality
    • Silent
    • Dust filtering
    • Air flow
    • Value for money
  • nikos_koustenis4414
    5
    nikos_koustenis4414

    Very nice case, I chose it because a friend asked me to build him a powerful computer with a small case, it comes with 5 pre-installed 120mm ARGB fans.

    Everything fit perfectly, easy installation, plenty of space,

    Sturdy case

    I highly recommend it!!!

    I combined it with
    psu thermaltake 750w rgb
    M/b gigabyte b550
    Cpu Amd Ryzen 7 5700g
    Cooler Raijintek eleos rgb
    Ram g skill 3600 32gb
    Nvme patriot 256gb

    Translated from Greek ·
    1
  • geo_moula
    4
    geo_moula

    The good:

    Relatively small footprint for a midi case
    It has filters on the top and bottom vents.

    Plenty of space for 4 2.5'' SSD/HDD and 2 for 3.5 HDD, and you can remove them easily.

    It is quite sturdy for the price and size.

    Comes with pre-installed ARGB fans that are already cable managed.

    The panels are very easy to remove and install.

    Airflow seems good, but I need to look into it more.

    The PCIe covers are with screws and can be re-installed, unlike other cases in its price range.

    All the fan rails take both 120'' and 140''.

    The bad:
    On the right and front panel, there is mesh for about 10 cm, which helps with airflow but lets dust through easily.

    Space for cable management is average, and the CPU cable doesn't pass if the motherboard is installed, and if the cable is passed, it will complicate the installation of the motherboard. Depending on the PSU, it will obstruct the back panel.

    The pre-installed fans are noisy and are not PWM; they just connect directly to the PSU, which means the speed cannot be controlled and is always at 100%.

    Overall, it is a good VFM case; personally, I would change the fans as soon as possible.

    Translated from Greek ·
    0
  • 4
    VasilisDavid

    0
  • 5
    xaris_xanidis

    0
  • 5
    ΜΑΡΚΟ ΠΕΡΣΚΕΦΑ

    0
  • See all
60,11 €
35,00 €   shipping cost