Skroutz.mt

PrimaCreator Value UV / DLP Resin for 3D Printer Light Grey 500ml
3D Printer Resin

PrimaCreator Value UV / DLP Resin for 3D Printer Light Grey 500ml

PrimaCreator Value UV / DLP resin is suitable for UV-LED and DLP 3D printers and is designed to cure at a wavelength of 395–405 nm. Its fast curing helps reduce print times, while printed objects...

PrimaCreator Value UV / DLP resin is suitable for UV-LED and DLP 3D printers and is designed to cure at a wavelength of 395–405 nm. Its fast curing helps reduce print times, while printed objects feature fine details and smooth, semi-matte surfaces with even transitions between layers.

After printing, excess resin can be rinsed off with isopropyl alcohol...

See full description See full description
15 92 €
Delivery by Wed, 11 Nov
14,00 €   shipping cost
Sent from Greece
From Grobotronics 4.9 (45)
4.9 (45 reviews)
Greece
3 pieces
See Printer Supplies on the page of Grobotronics

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

PrimaCreator Value UV / DLP resin is suitable for UV-LED and DLP 3D printers and is designed to cure at a wavelength of 395–405 nm. Its fast curing helps reduce print times, while printed objects feature fine details and smooth, semi-matte surfaces with even transitions between layers.

After printing, excess resin can be rinsed off with isopropyl alcohol (IPA), and the object can be fully cured in a UV chamber or in sunlight. Curing takes approximately 2–5 minutes in a UV chamber and 10–20 minutes in sunlight; in cloudy conditions, it may take up to 60 minutes. The resin has a low odor and minimal evaporation.

  • Color: Light gray
  • Capacity: 500 ml
  • Resin type: Standard UV / DLP
  • Compatibility: UV-LED and DLP 3D printers
  • Curing wavelength: 395–405 nm
  • Viscosity: 100–150 mPa·s at 25 °C
  • Density: 1.05–1.13 g/cm³
  • Hardness: 85–88 Shore D
  • Tensile strength: 42 MPa
  • Flexural strength: 60 MPa
  • Elongation at break: 10%
  • Storage temperature: 5–40 °C
  • Storage conditions: Protect from light

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Compatibility
PrimaCreator
Colour
Grey
Capacity
500 ml
Resin Type
Standard

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

PrimaCreator Value UV / DLP resin is suitable for UV-LED and DLP 3D printers and is designed to cure at a wavelength of 395–405 nm. Its fast curing helps reduce print times, while printed objects feature fine details and smooth, semi-matte surfaces with even transitions between layers.

After printing, excess resin can be rinsed off with isopropyl alcohol (IPA), and the object can be fully cured in a UV chamber or in sunlight. Curing takes approximately 2–5 minutes in a UV chamber and 10–20 minutes in sunlight; in cloudy conditions, it may take up to 60 minutes. The resin has a low odor and minimal evaporation.

  • Color: Light gray
  • Capacity: 500 ml
  • Resin type: Standard UV / DLP
  • Compatibility: UV-LED and DLP 3D printers
  • Curing wavelength: 395–405 nm
  • Viscosity: 100–150 mPa·s at 25 °C
  • Density: 1.05–1.13 g/cm³
  • Hardness: 85–88 Shore D
  • Tensile strength: 42 MPa
  • Flexural strength: 60 MPa
  • Elongation at break: 10%
  • Storage temperature: 5–40 °C
  • Storage conditions: Protect from light

Manufacturer

Manufacturer Details

Warnings & Safety Information
Compatibility
PrimaCreator
Colour
Grey
Capacity
500 ml
Resin Type
Standard

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

15,92 €
14,00 €   shipping cost