The DLP resin for 3D printers PrimaCreator Value Water Washable UV / DLP allows you to create high-quality 3D prints. Create prints with fine structures, nice details, and stunning surfaces. This resin processes well in 3D UV LED & DLP printers with a wavelength range of 395-405 nanometers.

Material Features:

• For use in 3D UV LED & DLP printers
• Optimized for processing in the wavelength range of 395-405 Nm
• Details and perfect surfaces in 3D prints
• Minimal material odor
• Water washable, no IPA needed
• Fast curing time: 4-8 seconds per layer

The PrimaCreator Value resin delivers excellent results at a lower cost compared to many other brands. The new water washable resin offers the same high quality as our other resins, allowing you to easily clean the 3D print with simple water, without chemicals.

Printing Capability and Features:

• 3D prints with vibrant colors and attractive transparent parts
• The final and cleaned 3D part has a beautiful, semi-matte surface with excellent details
• This resin has a minimal odor
• Designed to work well with low power DLP printers such as Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire

High Quality and Curing:

• The 3D resin from the VALUE series is high quality
• Curing occurs perfectly in sunlight or a UV curing chamber
• Completed 3D prints will be hard with minimal shrinkage

Curing Times:

• In UV chamber: approximately 2-5 minutes
• In sunlight: 10-20 minutes
• In cloudy weather: up to 60 minutes

Additional features include: Flexural modulus: 1.882-2.385Mpa, Elongation at break: 4-10, Flexural strength: 40-58MPa, Hardness (Shore D): 85-88 D, Hot deformation temp.: 80℃, Glass transition temp.: 100℃, Thermal expansion: 95*E-6, Density: 1.05—1.25 g/cm3, Volume shrinkage: 3.35%-4.24, Notched impact strength: 41-48j/m, Linear shrinkage: 1.05-1.35, Viscosity: 100-350MPa·s, Tensile strength: 30-52MPa, Tensile modulus: 1.779—2.385 MPa.